Alarm Annunciatior

  • Rate:
  • 5.0
  • From
  • 5
  • Votes:
  • 1
  • Visits:
  • 1055
Alarm Annunciatior

Alarm annunciatior is an equipment which is used for warning and alarm when the faults and errors are happened in control system.This product is applied in industrial places and is available in standard dimensions. Different models of Alarm annunciatiors can be mounted on panels, rail or rack. The outputs of system errors, which is worked according to N.O. or N.C. contacts, are connected to alarm annunciatior, while the output of alarm excitation is enabled and the product will be annunced the alarm. Bornika is the sales agent of contrel in the fields of consultation , sales and distribution of power industry products including Alarm annunciatior is active.

Products

Panel signaling SQ

Model: SQ Order code: SQ

The SQ type basic signaling cells are available in the 30 mm x 30 mm versions. The 30 mm x 30 mm dimension has been chosen, since one may reach the 72 mm x 72 mm dimension with a possible combination of 4 cells. All above to allow its installation with other systems built, according with DIN standard.

Show Detail

Alarm annunciator COMPALARM AP

Model: COMPALARM AP Order code: AP 24, AP 48, AP 110, AP 220

The COMPALARM AP is a point alarm system, with as many normally closed input contacts. It gives the possibility of selecting the alarm sequence according with 30 x 30 mm cells, fitted with ultra bright white LED’s, achieving a low power consumption and a lamp maintenance free operation.

Show Detail

Mechanical alarm annunciator COMPALARM CM

Model: COMPALARM CM Order code: CM2, CM4, CM6,

The COMPALARM CM devices allow to maintain the information of the parameter in avery or alarm, even without the auxiliary power supply or voltage black out.

Show Detail

Alarm annunciator COMPALARM C2C

Model: COMPALARM C2C Order code: C2C

The COMPALARM C2C is a very compact and efficient alarm system, suitable for 12 points connection, with NO or NC input contacts and LED signals.

Show Detail

Display alarm annunciator

Model: COMPALARM D Order code: D2M

The D Series alarm display is used to inform the operator that a process has gone beyond set limits using visual messages and audible device.

Show Detail

Display alarm annunciator COMPALARM D2

Model: COMPALARM D Order code: D2

The D Series alarm display is used to inform the operator that a process has gone beyond set limits using visual messages and audible device.

Show Detail

Alarm Visualization COMPALARM CO/sq

Model: COMPALARM CO/sq Order code: CO.3/sq, CO.4/sq

The COMPALARM C0/sq is a very attractive and economic alternative to the traditional signalling lamps, by grouping 3 or 4 light signals.

Show Detail

Alarm Visualization COMPALARM C2/sq

Model: COMPALARM C2/sq Order code: C2/sq

COMPALARM C2/sq is a very attractive and economic alternative to the traditional signalling lamps, by grouping 12 light signals.

Show Detail

Alarm Visualization COMPALARM C3/sq

Model: COMPALARM C3/sq Order code: C3/sq

COMPALARM C3/sq is a very attractive and economic alternative to the traditional signalling lamps, by grouping 12 light signals.

Show Detail

Rack alarm annunciator

Model: COMPALARM A Order code: COMPALARM A

The system is composed by: • Alarm card • Power supply and flashing card • Relay card • Timing card • Card holder unit • Power transformers and Dc/Dc converters • Signalling cells, SQ type (with LED on request)

Show Detail

GSM Modem for industrial application

Model: COMPALARM GW Order code: GW-12, GW-42, GW-122

GW Series is an industrial DIN rail GSM modem for the supervision and control of remote inputs and outputs by means of enhanced features available through GSM network and the Web.

Show Detail