Active / Reactive Power Transducer are used for measuring and converting active power and reactive power of a single/three phase system with balanced or unbalanced load into proportion load independent DC current or voltage. Bornika is the exclusive agent of Zeigler in the fields of consultation , sales and distribution of power industry products including Active/Reactive Power Transducer .
Model: Pro-P Order code: Pro-P
The Ziegler PRO - P transducer is used to measure and convert active, reactive, apparent power, Phase angle & Power Factor of a Single-phase or Three-phase AC system with balanced or unbalanced load into a proportional load independent DC current or voltage output signal .
Show Detail
Model: P11 Order code: P11
Ziegler P11 measures active/reactive power of a single/three phase system with balanced or unbalanced load by TDM (Time Division Multiplexing) principle and converts it into proportion load independent DC current or voltage.
Show Detail
Model: TAS-331DG Order code: TAS-331DG No:2962010200-x
TAS-331DG is a micro-controller based AC transducer with 1 analogue output for measurement of power or reactive power on an AC network. TAS-331DG can be delivered pre-configured to the desired measuring value and range or it can be delivered un-configured for customer configuration through the PC interface. The PC configuration makes free adjustment of the full input range and output range possible without any mechanical settings or adjustments inside the transducer. The transducer holds no mechanical moving parts like potentiometers, and the calibration stability is excellent. TAS-331DG will check the wiring for faults when starting up and indicate possible faults on an LED.
Show Detail
Model: KCW17 Order code: KCW17x
The digital controlled KPW17x range provides precision (1.0%) reverse power and overload protection and monitoring of three phase generators.
Show Detail
Model: KCW18 Order code: KCW18x
The digital controlled KCW18x range provides precision (1.0%) kW overload protection and monitoring of three phase generators or motors.
Show Detail
Model: P41 Order code: P41-a bb c d
Programmable transducer P41 type is destined for conversion into analog or digital signals 1-phase network parameters.
Show Detail
Model: KCW19 Order code: KCW19x
The digital controlled KCW19x range provides precision (1.0%) 2-step overload protection and monitoring of three phase generators or motors.
Show Detail
Model: KCVA17 Order code: KCVA17x
The digital controlled KCVA17x range provides precision (1.0%) reverse reactive power and overload protection and monitoring of three phase generators.
Show Detail
