DC shunts convert high value current in DC circuits into proportional voltage drop (50mV/60mV/75mV/150mV) which can be connected of DC voltmeters to measure the high value current. Form A : Insulating base mounted shunts clamping to DIN mounting rail or wall mounting (upto 30A) without insulating base (31...150A) , High conductivity brass Form B : L-profile end blocks , High conductivity brass / copper Form C : High conductivity brass / copper Base material : Polycarbonate Accuracy class : Class 1, 0.5, 0.2 (Optional) Bornika is the exclusive agent of Ziegler, Lumel, Enerdis company in fields of consultation, sales and distribution of power industry products including DC Shunts .
Product list of Current Shunt
DC shunts convert high value current in DC circuits into proportional voltage drop (50mV/60mV/75mV/150mV) which can be connected of DC voltmeters to measure the high value current.
Enerdis DC current shunt used for measuring high currents in DC networks. enerdis shunts are available in five following models: 76-2:with Eye connection, Eye connection on base 77-2: with Plate connection for busbar SHMI: with Screw, Eye and to block for busbar connection SHEL: with Direct connection to measuring component Enerdis DC shunts are available in 1A to 6000A with voltage drops: 50 mV - 60 mV - 100 mV - 150 mV - 200 mV - 300 mV - 1 V
Measuring shunts B2 type are destined to extend measuring ranges of d.c. ammeters, wattmeters and electrodynamic or ferrodynamic counters which accuracy classes are: 1, 1.5, or 2.5
Measuring shunts B3 type are destined to extend measuring ranges of d.c. ammeters, wattmeters and electrodynamic or ferrodynamic counters which accuracy classes are: 1, 1.5, or 2.5
Measuring shunts B4 type are destined to extend measuring ranges of d.c. ammeters, wattmeters and electrodynamic or ferrodynamic counters which accuracy classes are: 1, 1.5, or 2.5
Measuring shunts B5 type are destined to extend measuring ranges of d.c. ammeters, wattmeters and electrodynamic or ferrodynamic counters which accuracy classes are: 1, 1.5, or 2.5
Measuring shunts B6 type are destined to extend measuring ranges of d.c. ammeters, wattmeters and electrodynamic or ferrodynamic counters which accuracy classes are: 1, 1.5, or 2.5
Shunts provide an accurate DC milivolt signal to drive moving-coil ammeters, overload protection and control units for higher ampere range. Shunt Resistors introduced by two generally type as 60 and 150 mV. Type 60 mV divided into A and B form. Also , Type 150mV divided into Three form as A , B and C.