Two phase switching power supply

Visits : 618
Two phase switching power supply

Two phase switching power supply is an electrical power source which is used to produce power for demanding loads in high efficiency and in adjustable voltage and current values. Two phase switch- made power supplies are produced for current range from 5 to 14 A. When more power is required, switching power supplies can be paralleled. Special features of two phase switch-made power supplies : - High efficiency -Low loss power - power boost by parallel connection - Short circuit protection: 1) Manual reset: In case of short-circuit or overload, the output current is interrupted. In order to restart the output it is necessary to switch-off the input circuit for about 1 minute. 2) Hiccup mode: In case of short-circuit or overloading, the output current is interrupted. The device tries again to re-establish output voltage and normal condition about every 2 second till the problem is cleared. 3)Continuous output mode: In case of short –circuit or overload, the output current is kept at high values with near zero voltage. In case of short circuit the current can reaches up to 3 times the rated current at 60ºc. This protection mode is used to meet the requirements of demanding loads such as motors, solenoid valves, lamps, PLC with highly capacitive input circuits and other loads with marked transient overload behavior. Bornika has the exclusive agent of Ziegler in the fields of consultation, sales and distribution of power industry products including two phase power supply including 24 v, 5 A, 8A and 14 A.

Products

Two phase power switching supply, PS2 - 2405

Model: PS2 Order code: PS2 - 2405

Two phase switch- made power supply (SMPS) is used to produce electrical energy for one or more demanding loads. This equipment produced energy with high efficiency and low loss power. The output voltage of two phase power switching supply, type PS2 - 2405 is 24 volt dc.

Show Detail

Two phase power switching supply, PS2 - 2408

Model: PS2 Order code: PS2 - 2408

Two phase switch- made power supply (SMPS) is used to produce electrical energy for one or more demanding loads. This equipment produced energy with high efficiency and low loss power. The output voltage of two phase power switching supply, type PS2 - 2408 is 24 volt dc and the output current is 8 A.

Show Detail

Two phase power switching supply, PS2 - 2414

Model: PS2 Order code: PS2 - 2414

Two phase switch- made power supply (SMPS) is used to produce electrical energy for one or more demanding loads. This equipment produced energy with high efficiency and low loss power. The output voltage of two phase power switching supply, type PS2 - 2414 is 24 volt dc. The output current is 14 A.

Show Detail