Junction Box Systems have been divided into two types as flat wall and perforated wall. the junction boxes with flat wall are made from polypropylene (a thermoplastic material) and have closed side walls. This means that the required openings can be made wherever they are required. Also , Junction boxes with perforated wall have different inlet and outlet depend on different models. Junction Box Systems produced into four series as A , B , T and fire protection series. All the T series junction boxes are UV-resistant. Bornika is the exclusive agent of OBO Bettermann in the fields of consultation, sales and distribution of power industry products including Junction Box Systems is active.

Product list of Junction Box Systems

Junction box

Junction box

Junction box series A produced by OBO bettermann company has been introduced into five models that made from Polyethylene . These boxes are flame resistant up t0 650 degrees and made from halogen free materials.

Show details
Junction box with plug-in seal

Junction box with plug-in seal

All the T series junction boxes are UV-resistant. They are made of a thermoplastic polypropylene plastic with plug-in seals made of ethylene vinyl acetate (EVA). This plastic is soft, which means that it is malleable.

Show details
plug-in seal and flame-resistant Junction box

plug-in seal and flame-resistant Junction box

All the T series junction boxes are UV-resistant. They are made of a thermoplastic polypropylene plastic with plug-in seals made of ethylene vinyl acetate (EVA). This plastic is soft, which means that it is malleable.

Show details
plug-in seal Junction box with terminal strip

plug-in seal Junction box with terminal strip

All the T series junction boxes are UV-resistant. They are made of a thermoplastic polypropylene plastic with plug-in seals made of ethylene vinyl acetate (EVA). This plastic is soft, which means that it is malleable.

Show details
Closed Junction Box

Closed Junction Box

All the T series junction boxes are UV-resistant. They are made from polypropylene (a thermoplastic material) and have closed side walls. This means that the required openings can be made wherever they are required. EDK plug-in seals or cable glands with locknuts can be inserted in these openings, to allow cable insertion.

Show details
Junction box with IP67 protection class

Junction box with IP67 protection class

The junction boxes have seven pre-marked cable entries with a diameter of 20 mm. These can be knocked out when required and can, for instance, be equipped with plug-in seals or cable glands . High impact resistance due to robust construction and high-quality materials and Universally deployable: UV-resistant for use outdoors, halogen-free for the use indoors .

Show details
Pre-embossed Cable junction box and cable gland

Pre-embossed Cable junction box and cable gland

Set with junction box and V-TEC screw connection . The junction boxes have seven pre-marked cable entries with a diameter of 20 mm. These can be knocked out when required and can, for instance, be equipped with plug-in seals or cable glands . High impact resistance due to robust construction and high-quality materials and Universally deployable: UV-resistant for use outdoors, halogen-free for the use indoors .

Show details
Industrial Junction Box

Industrial Junction Box

The junction boxes consist of thermoplastic material. The bottom parts are made from impact-resistant polypropylene, the box cover is made from extremely hard-wearing, impact-resistant polycarbonate. The high IK 10 impact resistance at -5°C shows this also. Thanks to the elevated cover, OBO creates significantly more wiring space, therefore offering the facility to install and protect pushbuttons and series terminals, as well as the option to accommodate control sensors, switches and electronic equipment from the housing and installation technology area. Together with the fastening plate, it is an ideal partner in visible installations.

Show details
Junction box with transparent elevated cover

Junction box with transparent elevated cover

The junction boxes consist of thermoplastic material. The bottom parts are made from impact-resistant polypropylene, the box cover is made from extremely hard-wearing, impact-resistant polycarbonate. The high IK 10 impact resistance at -5°C shows this also. Thanks to the elevated cover, OBO creates significantly more wiring space, therefore offering the facility to install and protect pushbuttons and series terminals, as well as the option to accommodate control sensors, switches and electronic equipment from the housing and installation technology area. Together with the fastening plate, it is an ideal partner in visible installations.

Show details
Junction box with Modul 45 sockets in cover

Junction box with Modul 45 sockets in cover

The junction boxes are made of a thermoplastic polypropylene polymer and are equipped with strain relief entries. These entries can be penetrated directly with the cables. The special structure of the opening means that the cables cannot be removed unintentionally. Suitable for cable diameters of between 7 and 21 mm. Depending on the type, the cover contains two or four Modul 45 protective contact sockets in red or white.

Show details
Junction box with 3-pole Wieland socket

Junction box with 3-pole Wieland socket

All the T series junction boxes are UV-resistant. They are made of polypropylene (a thermoplastic polymer) and are equipped with strain relief entries and pre-terminated Wieland connection sockets, type GST-18-i3 (s = black, w = white, r = red). The strain relief entries can be penetrated directly with the cables. The special structure of the opening means that the cables cannot be removed unintentionally. Suitable for cable diameters of between 7 and 21 mm. According to standard VDE 0620-1: Installation only by people with the relevant electrical knowledge and experience. There is danger to life if installed incorrectly.

Show details
Junction box with 4-pole Wieland socket

Junction box with 4-pole Wieland socket

All the T series junction boxes are UV-resistant. They are made of polypropylene (a thermoplastic polymer) and are equipped with strain relief entries and pre-terminated Wieland connection sockets, type GST-18-i3 (s = black, w = white, r = red). The strain relief entries can be penetrated directly with the cables. The special structure of the opening means that the cables cannot be removed unintentionally. Suitable for cable diameters of between 7 and 21 mm. According to standard VDE 0620-1: Installation only by people with the relevant electrical knowledge and experience. There is danger to life if installed incorrectly.

Show details

COMMENTS