Meter with internal Relay

  • Rate:
  • 4.0
  • From
  • 5
  • Votes:
  • 1
  • Visits:
  • 1193
Meter with internal Relay

Meter with internal Relay with linear Scale characteristics, produced with polycarbonate case in size of 96 mm, and having output relay ,as well as measure a.c. voltage or current signals in True RMS , provides overcurrent guard for overload protection of AC generators, motors, transformers etc. used for againsting tripping of non-essential load or breaker. The model which has alarm, measure a.c. voltage or current signals in True RMS. It has two alarms fully programmable through the lateral microswitches. The measurement system is based in a Coil moving instrument and the alarm control on microprocessor, that takes samples from the measuring signal, and provides True RMS measurements. Borna niroo karan company( Bornika ) has the exclusive representative of Ziegler company , Zurc and megacon company , in the purchase in the purchase, sales, consulting and distribution of industrial equipment and measurement equipment, including a Meter with internal Relay is active.

Products

Generator Active Power Guard

Model: KPW17x Order code: KPW17x

The digital controlled KPW17x range provides precision (1.0%) reverse power and overload protection and monitoring of three phase generators.

Show Detail

Single Phase Current Guard

Model: KEC101x Order code: KEC101

KEC101x series provides current overload protection of single phase generators or motors.

Show Detail

Three Phase Current Guard

Model: KEC112x Order code: KEC112

KEC112x series provides overcurrent guard for overload protection of AC generators, motors, transformers etc. for alarms or tripping of non-essential load or breaker.

Show Detail

Current Differential Guard

Model: KPC112x Order code: KPC112

KPC112E protects against phase-, earth- and winding faults within the protected area (the stator) of large AC generators.

Show Detail

Generator Active Power overload Guard

Model: KPW18x Order code: KPW18x

The digital controlled KPW18x range provides precision (1.0%) overload protection and monitoring of three phase generators.

Show Detail

Ammeter/Voltmeter with internal Relay

Model: PQC Order code: PQC 96

These meters offer several advantages in switchboards and transformers Panels, used for measurement of electrical parameters along with the threshold settings for relay operation. Suitable for measuring DC voltage and current . with linear Scale characteristics . produced in the form of polycarbonate , in size of 96 mm .

Show Detail

Current Imbalance Guards

Model: KPC110x Order code: KPC110

The digitally controlled KPC110x monitor and convert the three current transformer (CT) inputs into a signal proportional to the difference between the HIGHEST and the LOWEST input level.

Show Detail

Active Power 2-step overload Guard

Model: KPW19 Order code: KPW19x

The digitally controlled KPW19x range provides precision (1.0%) 2-step overload protection and monitoring of three phase generators or motors.

Show Detail

Generator Reactive Power Guard

Model: KPVA17 Order code: KPVA17x

The digital controlled KPVA17x range provides precision (1.0%) reverse reactive power and reactive overload protection and monitoring of three phase generators.

Show Detail

Analogue guard and controller

Model: KPM13 Order code: KPM13x

The KPM13x is a digitally controlled guard/controller for use in a large range of applications such as power guards, load controller, DC current guards, DC voltage guards, etc.

Show Detail

Analogue Instrument with Contacts Moving Coil

Model: CBC 96 Order code: Z14xxx

Analogue Instrument with Contacts Moving Coil CBC96, measure d.c. voltage or current signals.. It has two alarms fully programable through the lateral microswitchs. The measurement system is based in a Coil moving instrument and the alarm control on microprocessor, that takes samples from the measuring signal.

Show Detail

ZURC Analogue Instrument with Contacts Moving Coil

Model: CRBC96 Order code: CRBC96

ZURC Analogue Instrument with Contacts Moving Coil CRBC96, measure a.c. voltage or current signals in True RMS. It has two alarms fully programable through the lateral microswitchs. The measurement system is based in a Coil moving instrument and the alarm control on microprocessor, that takes samples from the measuring signal, and provides True RMS measurements.

Show Detail