Analog Ammeter and Voltmeter are suitable for measuring Direct Current ( DC ) and alternating current ( AC ) electrical parameters. Ammeter and Voltmeter panel meters in various sizes, to measure voltage and current quantities have been produced . In these meters, the maximum deviation of pointer is 90 and 240 degrees, that for each 90 or 240 degrees respectively , the analog meter displays the maximum amount of measurement quantities. Analog Ammeter and Voltmeter in both AC and DC currents , 48x48 and 72x72 and 96x96 and 144x144 in standard sizes are offered. The special features of this device are : - Scale interchangeability - Near linear scale - Glass filled polycarbonate housing - Easily replace able glass and bezel Borna niroo karan company( Bornika ) has the exclusive representative of Ziegler company and ZURC company , in the purchase, sales, consulting and distribution of industrial equipment and measurement equipment, including a Ammeter and Voltmeter is active.

Product list of Ammeter and Voltmeter

Analog Panel Ammeter/Voltmeter

Analog Panel Ammeter/Voltmeter

DS 48/72/96/144 housed in moulded polycarbonate cases are suitable for the measurement of DC currents and voltages .

Show details
AC Ammeter / Voltmeter

AC Ammeter / Voltmeter

Analog Panel meters , DE 48/72/96/144 housed in moulded polycarbonate cases are suitable for the measurement of AC currents for frequency range of 15...400Hz and voltages in the frequency range of 15...100Hz . Analog Panel meters indicate rms-values practically independent of waveform even of high harmonics .

Show details
Ziegler DSL Analog 240° Panel Ammeter/Voltmeter

Ziegler DSL Analog 240° Panel Ammeter/Voltmeter

Analog 240° Panel Ammeter/Voltmeter , DSL 48/72/96,144 housed in moulded polycarbonate cases are suitable for the measurement of DC currents and voltages . These instruments offer several advantages in switchboard and Generating Set Panels .

Show details
analog Ammeter

analog Ammeter

Analog 240° Panel Ammeter/Voltmeter , DGL 48/72/96,144 housed in moulded polycarbonate cases are suitable for the measurement of AC currents and voltages. These instruments offer several advantages in switchboard and Generating Set Panels . measure average values & are calibrated to indicate RMS values, assuming a sinusoidal waveform for frequencies from 40 to 10000 Hz (AC current - 40 to 1000 Hz and AC voltage - 40 to 10000 Hz)

Show details
Analog Meters Clamping to DIN Rails

Analog Meters Clamping to DIN Rails

The analog EQ 35, PQ 35, ZQ 35 meters, designed for the measurement of current, voltage & frequency in distribution , installations which utilizes 35 mm.DIN rails for equipment mounting. These meters housed in molded Polycarbonate cases are suitable for the measurement of AC current & voltage, DC current & voltage & Frequency . Frequency meters are designed to measure system frequency from 45..65 Hz with different system voltages .

Show details
DC Signal Meter

DC Signal Meter

The moving coil meters are applied to measure low power DC signals, for example 0 to 1 mA/4 to 20 mA/0 to 10V DC etc. DQ is available in four different sizes, in other words 48 mm, 72 mm, 96 mm and 144 mm.

Show details
AC Micro ammeter

AC Micro ammeter

Analog Panel meters , DG 48/72/96/144 housed in moulded polycarbonate cases are suitable for the measurement of AC currents and voltages . These instruments offer several advantages in switchboard and Generating Set Panels .

Show details
Moving Coil Meter with Rectifier

Moving Coil Meter with Rectifier

VAGL meters with built-in rectifiers are used for measurement of the rectified current or voltage arithmetical mean value and they are such calibrated that they indicate the RMS value at sinusoidal curve shape.

Show details
240 Degrees Voltage and Current Meter

240 Degrees Voltage and Current Meter

Moving-coil meters VAML types are destined to measure d.c. voltage or d.c. current.

Show details
Analog Ammeter/Voltmeter with internal Relay

Analog Ammeter/Voltmeter with internal Relay

These meters offer several advantages in switchboards and transformers Panels, used for measurement of electrical parameters along with the threshold settings for relay operation. Suitable for measuring AC voltage and current . with linear Scale characteristics . produced in the form of polycarbonate , in size of 96 mm .

Show details
DIN rail instrument

DIN rail instrument

The D45 moving iron instrument for DIN rail mounting (35 x 15mm) is fitted for DC measurement. The quadratic D45 is available in 45mm size.

Show details
Analog Voltmeter/Ammeter with Selector Switch

Analog Voltmeter/Ammeter with Selector Switch

Analog Panel meters , EQ-SWT housed in moulded polycarbonate cases are suitable for the measurement of AC currents for frequency range of 15...400Hz and voltages in the frequency range of 15...100Hz . Analog Panel meters indicate rms-values practically independent of waveform even of high harmonics.

Show details

COMMENTS