Fire Protection Systems

  • Rate:
  • 3.0
  • From
  • 5
  • Votes:
  • 1
  • Visits:
  • 361
Fire Protection Systems

Fire Protection Systems (BSS), are equipment which prevent the spread of fires to other parts of the building. Applying of BSS are increasing . Insulation systems reliably seal the ceiling and wall penetrations required for installations against fire and smoke. Fire Protection Systems (BSS) for achieving to below protection aims are produced: 1) Maintenance of the fire sections: The division of building into fire sections protects unaffected building sections against the spread of fires for specific periods of time. Insulation maintains the fire sections, thus limiting the spread of fire and smoke. These constructive measures protect people and property. 2) Protection of escape routes: there must be routes in buildings, which not only permit access to the building in a horizontal and vertical direction in normal situations, but which also offer the option of rescue in case of fire. Additional emergency and escape routes may also be necessary, depending on the type of building which includes: -Necessary staircases (vertical access) -Connecting rooms between the necessary stairwells and exits to the outside -Necessary corridors (horizontal access) 3)Function maintenance for electrical systems: If there is a fire, emergency and escape routes must remain usable and important technical equipment, such as emergency lighting, fire alarm systems and smoke extraction systems, continue to function. Therefore, it is essential that the power supply for these systems is specially protected. In addition, certain technical systems must support the fire brigades in fighting fires for a sufficiently long period of time. Bornika is the exclusive agent of OBO Bettermann in the fields of consultation, sales and distribution of power industry products including Fire Protection Systems (BSS), is active.

Products

Mortar

Model: MSX-S1 Order code: 7206 10 4

Mortar to create cable and combination insulation in solid walls and ceilings. Suitable for pumping, pressing and for manual installation.

Show Detail

Mineral fibre plate

Model: PSX-P Order code: 7202 29 5

Mineral fibre plate, pre-coated with the ablation coating ASX, as the basis for the soft insulation.

Show Detail

2-component fire protection foam

Model: FBS-S Order code: 7203 80 0

NG 2-component fire protection foam in a cartridge, including 2 mixing tubes.

Show Detail

fire protection cushion

Model: KBK Order code: 7202709 - 7202725 - 7202741

Cable fire protection cushions made of dense, closely-knit and mechanically solid glass mesh with a special filling.

Show Detail

Pipe sleeve with 2 fastening straps

Model: TCX Order code: 7202200 - 7202201 - 7202203

Pipe sleeve from OBO Bettermann for combustible pipes.

Show Detail

Metal fire protection duct type BSKM 0407

Model: BSKM 0407 Order code: 7216500

Metal fire protection duct type BSKM 0407 is Sheet steel duct with intumescent inner coating.

Show Detail

Cable fire protection bandage

Model: FSB Order code: FSB-BS, FSB-WB

Cable bandages are divided in two types. one is FSB-WLS which is applied in interior areas and wet rooms and another is FSB-WB which is used in industrial and outdoor areas.

Show Detail