Voltage & Current Transducers/Transmitter

  • Rate:
  • 3.0
  • From
  • 5
  • Votes:
  • 1
  • Visits:
  • 1478
 Voltage & Current Transducers/Transmitter

Voltage & current Transducer for AC & DC circuits are used for measuring direct, sine wave and distorted signals. the output signal is proportional to the root mean square value of the input current and voltage . Bornika is the exclusive agent of Zeigler in the fields of consultation, sales and distribution of power industry products including Direct Current (DC Transducers) and Alternative Current (AC Transducers).

Products

Transducer

Model: ZI11 Order code: ZI11

The purpose of the Ziegler ZI11 is to electrically isolate input, output and power supply. The device has single channels and provides single independent isolating amplifiers in an extremely small space .

Show Detail

Transmitter

Model: ZI12 Order code: ZI12

The purpose of the Ziegler ZI12 is to electrically isolate input, output and power supply. The device has single channels and provides single independent isolating amplifiers in an extremely small space and two DC signal output .

Show Detail

Dual output DC Transducer

Model: PI-102 Order code: PI-102

Dual output DC Transducer is purpose to electrically isolate input, outputs and power supply. The isolator fulfills all requirements and regulation concerning electromagnetic compatibility EMC and safety (IEC61326-1 and IEC 61010-1:2010). The device has one input and provides two independent outputs in an extremely small space.

Show Detail

Signal Isolator

Model: TI816 Order code: TI816

Isolating amplifier Ziegler TI816 , finds its applications for isolation, amplification and conversion of DC signals .The DC signal isolator serves to electrically isolate the analog DC signal in the range from 0(4)-20mA which , depending on version, is then converted to a current signal 0(4)-20mA or voltage signal 0(2)-10V. It does not require a separate power supply .

Show Detail

Ziegler V604-II programmable Transmitter

Model: V604-II Order code: V604-II

Programable universal transmitter , V604-II converts the variable - a DC current or voltage or a signal from a thermocouple , resistance thermometer , remote sensor or potentiometer to proportionate analogue output signal .

Show Detail

Isolator

Model: TV808 Order code: TV808

Isolating amplifier Ziegler TV808 , finds its applications for isolation, amplification and conversion of DC signals .The DC signal isolator serves to electrically isolate the analog DC signal in the range from 0(4)-20mA which , depending on version, is then converted to a current signal 0(4)-20mA or voltage signal 0(2)-10V.

Show Detail

Ziegler TI807 DC Signal Isolator

Model: TI807 Order code: TI807

Isolating amplifier Ziegler TI807 , finds its applications for isolation, amplification and conversion of DC signals .The DC signal isolator serves to electrically isolate the analog DC signal in the range from 0(4)-20mA which , depending on version, is then converted to a current signal 0(4)-20mA or voltage signal 0(2)-10V. It does not require a separate power supply .

Show Detail

DC Current and Voltage Transducer

Model: P20H Order code: P20H- a b c dd e f

Transducers of P20H types are applied for the continuous conversion of d.c. voltage and d.c. current into a standard d.c. current, d.c. voltage signal or RS-485 digital signal.

Show Detail

Programmable Transducer

Model: P12H Order code: P12H-a bb c d e ff g

Programmable measuring transducer P12H type is destined to convert of d.c. current and d.c. voltage into a digital or standard current or voltage signal. The output is galvanically isolated from the input and supply. The insulation exists also between the current and voltage input.

Show Detail

DC Transducer

Model: P30H Order code: P30H- a b c d e ff g h

P30H is a transducer which was designed to photovoltaic , battery, telecommunication and railway installations. P30H measures and records current, voltage, power, energy and other d.c. circuit parameters.

Show Detail

Universal transducer

Model: P30U Order code: P30U- a b c d ee f g

P30U transducer is designed to convert temperature, resistance, standard voltage and current signals into a standard DC voltage or DC current signal. The output signal is galvanically isolated from the input signal and the power supply. P30U has programmable measurement and additional functions. Programming parameters can be realized with the use of buttons, via RS-485 interface and free e-con software or Ethernet or any web browsers via Ethernet interface.

Show Detail

Isolated DC Transducer

Model: VTR05 Order code: VTR05- aa b c dd e

VTR05 ensures galvanic isolation between input, output and the supply circuit. The transducer meets all the requirements concerning EMC according to PN-EN 61010 standard.

Show Detail