Single Phase Power Switching Supply PS1 - 4807

Model:
PS1 - 4807 | ZAU PS1 4807
Request Code:
PS1 - 4807

Company:
Ziegler
Country:
England

Single phase switch- made power supply (SMPS) is used to produce electrical energy for one or more demanding loads. This equipment produced energy with high efficiency and low loss power. The output voltage of single phase power switching supply, type PS1 - 4807 is 48 volt dc and the output current is 7 A. it can be supplied with both dc voltage and ac voltage. Single phase switch- made power supply type PS1 - 4807 has power boost and short circuit protection capability. In addition, this switching power supply has a relay to monitor the output voltage. Power boost feature allows the use of a smaller size instead big size units to power demanding loads such as motors, solenoid valves, lamps and other loads which needs high power sources. short circuit protection : - Manual Reset - Hiccup mode - Continuous mode the efficiency of the PS1 - 4807 model is up to 91% and the maximum power is 336 w. Bornika has the exclusive agent of Ziegler in the fields of consultation, sales and distribution of power industry products and switching power supplies in different voltage and power ranges.

Share in social networks

Instagram Telegram Aparat Facebook Linkedin

Single Phase Power Switching Supply PS1 - 4807 Specification

Dimensions	72 X 115 X 135mm
IP	IP 20
Input voltage range	90 V-135 V (115 v ac) 180 V- 264 V (230 v ac)
Output Voltage	48 volt
Output Current	7 A
Input Current	3.3 A (115 Vac )- 2.2 A (230 Vac)
Efficiency	≥ 91 %
Number of phases	1

Single Phase Power Switching Supply PS1 - 4807 Catalogs

Download Catalog : Ziegler ZAU PS1 4807 - Manual 190 KB

Download Catalog : PS1-4807 1678 KB

Download Catalog : switch mode power supply, 1phase, 2 phase and 3 phase 451 KB

Download Catalog : SMPS and linear power supply comparison 148 KB

Single Phase Power Switching Supply PS1 - 4807 More Description

Manual reset In case of short-circuit or overload, the output current is interrupted. In order to restart the output it is necessary to switch-off the input circuit for about 1 minute. This protection mode is particularly suggested in application where safety procedures require that reset be carried out only be an authorized person.

Hiccup mode In case of short-circuit or overloading, the output current is interrupted. The device tries again to re-establish output voltage and normal condition about every 2 second till the problem is cleared.

Continuous output mode In case of short –circuit or overload, the output current is kept at high values with near zero voltage. In case of short circuit the current can reaches up to 3 times the rated current at 60ºc. This protection mode is used to meet the requirements of demanding loads such as motors, solenoid valves, lamps, PLC with highly capacitive input circuits and other loads with marked transient overload behavior.