Bornika Training

Trainning List

DEHNselect SPD Tool - Red Line

DEHNselect SPD is easy to use without special knowledge or training. The user-friendly surface facilitates the operation of the program.

Show Detail

DEHN Earthing Tool

The DEHN Earthing Tool is used to calculate the required length of the earth electrodes as per IEC 62305-3 depending on the type of earth electrode (foundation earth electrode, ring earth electrode, earth rod).

Show Detail

CDEGS - SESResults Viewer

SESResultsViewer software utility coupled with already introduced SESThreshold module represents the foundation on which SES started planning next generation of computation plot and report processor.

Show Detail

DEHN Distance Tool Module

The separation distance defines the minimum distance of the lightning protection system from electrically conductive materials.

Show Detail

Comparison between different Ground Electrodes

Comparison between different Ground Electrodes

Show Detail

Plate Vs. Grid (Mesh)

For comparison of ground electrodes characteristics, the FEM software package, COMSOL and MALT module of CDEGS software Package has been used.

Show Detail

Slanting Ground Electrodes

For the grounding grid, using a slanting ground rod to decrease the grounding resistance is more effective than applying vertical ground rods with the same length.

Show Detail

Yellow/LineSPDs

Yellow/Line SPDs

Show Detail

An introduction to ISGs, VCSD 40 & Surge Protection for CP Systems

An introduction to ISGs, VCSD 40 & Surge Protection for CP Systems

Show Detail

An introduction to Separation Distance , HVI Conductors & DEHNiso Combi

To prevent dangerous sparking inside the structure. This is achieved by establishing equipotential bonding or maintaining a separation distance between the components of the lightning protection system and other electrically conductive elements inside the structure. The HVI®Conductor is a high-voltage-resistant, insulated down conductor from DEHN, the expert for lightning protection and earthing, surge protection and safety equipment. Insulated lightning protection based on HVI®Conductors is durable and sustainable. In 2003, DEHN launched an innovation in external lightning protection, the high-voltage-resistant, insulated HVI®Conductor. Since then, thousands of buildings and installations have been successfully equipped with HVI®Lightning Protection

Show Detail

PV systems protection against of Lightning and Surge

This article describes how to use Bornika Company Lightning / Surge protection equipment in PV Systems.

Show Detail

Grounding electrodes in HF

Transient behavior of grounding electrodes in impulse condition is different from low frequency and low current condition. The impulse characteristics of grounding electrodes will be discussed.

Show Detail