Multi Function

Tags

DC Multifunction meter

Ziegler EM DC series is specially designed to measure, display and communicate DC Voltage, Current, Power and Energy to monitor and control the target system. It can be mentioned as its applications in below : -Solar Photovoltaic Systems -Battery chargers and systems -Wind Power Generation -Electroplating Industries -Power Distribution for Telecommunication -Industrial DC control Systems

View Details

Selectable AC transducer

TAS-311DG is a micro-controller based AC transducer with 1 analogue output for measurement of RMS voltages, RMS current, phase angle or frequency on an AC-network. TAS-311DG can be delivered pre-configured or it can be delivered unconfigured for customer configuration through the PC interface. The PC configuration software allows free choice of voltage, current, phase angle or frequency measurement including configuration of the measuring range and output range without any mechanical settings or adjustments inside the transducer. The transducer holds no mechanical moving parts like potentiometers, and the calibration stability is excellent.

View Details

Multi-transducer

The MTR-3 is intended for measuring and monitoring single-phase or three-phase electrical power network. The MTR-3 measures RMS value by means of fast sampling of voltage and current signals, which makes the instrument suitable for acquisition of transient events. A built-in microcontroller calculates measurements (voltage, current, frequency, energy, power, power factor, THD phase angles, etc.) from the measured signals.

View Details

Multi differential protection relay

The MDR-2 differential protection relay is a micro processor based control unit containing all necessary functions for monitoring of the differential currents for a synchronous/asynchronous generator or motor (the object). Via current transformers the MDR-2 measures each phase current on both sides of the object. The current transformers determine the limits of the protection area. Any failure within these limits (2- or 3-phase short circuits or earth leaks) will be detected as an error Id: Differential currents, the currents flowing through the two current transformers of the phase in question differ, and, if a preset limit value is exceeded, a warning will be given or a tripping signal transmitted. The MDR-2 dynamic compensation curves for warning and tripping are defined by the user.

View Details

Three Phase Power Analyzer

The MIC-2 MKII multi-instrument is a microprocessor based measuring unit providing measurement of most electrical quantities on a 2- or 3-phase electric energy distribution network. MIC-2 MKII can be used as a data logging device for an intelligent Power Distribution System or Plant Automation System. All measurements are monitored and data is available via the RS-485 Modbus port. Other communication types as Ethernet (Web page, TCP/IP Mod-bus and emails transfer) and Profibus DP are available options. True RMS values are measured with/without neutral and with both balanced and unbalanced load.

View Details

DEIF Multi Instrument

The MIC multi-instrument is a microprocessor-based measuring unit providing measurement of all electrical quantities on a 3-phase electric energy distribution network. The measurements are shown on the built-in display. The MIC also has an RS485 interface that supports data exchange with a control system via Modbus RTU.

View Details

LUMEL Digital Meter

Indicators of N24 series are destined for measurement of d.c. voltage or d.c. current, temperature from Pt100 sensors and J, K thermocouples, a.c. voltage and a.c. current. Thank to competitive price they are ideal solution for low-budget applications.

View Details

Temperature Digital Meter

Indicators of N25 series are destined for measurement of d.c. voltage or d.c. current, temperature from Pt100 sensors and J, K thermocouples, a.c. voltage and a.c. current. Thank to competitive price they are ideal solution for low-budget applications.

View Details

Three Phase Multi Meter

The ND20 meter, thanks to its design, available functions and communication possibilities is the ideal tool to control and monitor energy quality parameters and energy consumption in all industry branches, public utilities or in public service buildings.

View Details

Multi Power Meter

Measurement and recording of 54 parameters, harmonics up to 51st, graphical screen-fully configurable by a user and very user- friendly www server interface - these are just some advantages of our new power network meter ND30 type.

View Details

Portable harmonic analyzer

Portable harmonic analyzer type NP40 is the professional device to analyze the power system quality, supply the harmonics analysis and power quality data analysis, also provide big memory for the data storage, which is used to make the long term logger measuring to power system.

View Details

LUMEL Multi Meter

The meter is distinguished by a high measurement accuracy, legible backlit LCD display and an attractive price. Meter is supplied from measurement circuit.

View Details