Related tags for:

جریان

Ziegler V604-II programmable Transmitter
  • Programable universal transmitter , V604-II converts the variable - a DC current or voltage or a signal from a thermocouple , resistance thermometer , remote sensor or potentiometer to proportionate analogue output signal .
  • Details ...
Isolator
  • Isolating amplifier Ziegler TV808 , finds its applications for isolation, amplification and conversion of DC signals .The DC signal isolator serves to electrically isolate the analog DC signal in the range from 0(4)-20mA which , depending on version, is then converted to a current signal 0(4)-20mA or voltage signal 0(2)-10V.
  • Details ...
Signal Isolator
  • Isolating amplifier Ziegler TI816 , finds its applications for isolation, amplification and conversion of DC signals .The DC signal isolator serves to electrically isolate the analog DC signal in the range from 0(4)-20mA which , depending on version, is then converted to a current signal 0(4)-20mA or voltage signal 0(2)-10V. It does not require a separate power supply .
  • Details ...
Transducer
  • The purpose of the Ziegler ZI11 is to electrically isolate input, output and power supply. The device has single channels and provides single independent isolating amplifiers in an extremely small space .
  • Details ...
Ziegler TI807 DC Signal Isolator
  • Isolating amplifier Ziegler TI807 , finds its applications for isolation, amplification and conversion of DC signals .The DC signal isolator serves to electrically isolate the analog DC signal in the range from 0(4)-20mA which , depending on version, is then converted to a current signal 0(4)-20mA or voltage signal 0(2)-10V. It does not require a separate power supply .
  • Details ...
Transmitter
  • The purpose of the Ziegler ZI12 is to electrically isolate input, output and power supply. The device has single channels and provides single independent isolating amplifiers in an extremely small space and two DC signal output .
  • Details ...
Three Phase Harmonic Filter
  • ECOsine three phase harmonic filters represent an economical solution to the challenge of load-applied harmonics mitigation in three-phase power systems.The active filter instantly adapts to all changes in the load and the systems harmonic content spectrum, in order to be able to optimally respond at any time.
  • Details ...
DC Multifunction meter
  • Ziegler EM DC series is specially designed to measure, display and communicate DC Voltage, Current, Power and Energy to monitor and control the target system. It can be mentioned as its applications in below : -Solar Photovoltaic Systems -Battery chargers and systems -Wind Power Generation -Electroplating Industries -Power Distribution for Telecommunication -Industrial DC control Systems
  • Details ...
Versatile keyed Power Entry Filter Module
  • Power entry Filter model FN 380 like entry filter model FN 370 has versatility with electrical system, and it has switch that to be installed in. Also, this model has not voltage selector. Choosing FN 370 product line brings you the rapid availability of a standard filter associated with the necessary safety acceptances. Standard IEC connector filters are a practical solution helping you to pass EMI system approval in a short time. A wide selection on amperage ratings, fuse options, mounting possibilities and filters for medical applications are designed to offer you the desired solution.
  • Details ...
Versatile Filtered Power Entry Module
  • The FN 390 power entry module combines an IEC inlet, mains filter with single or dual-fuse holder, voltage selector and 2-pole rocker switch. Choosing FN 390 product line brings you the rapid availability of a standard filter associated with the necessary safety acceptances. Standard IEC connector filters are a practical solution helping you to pass EMI system approval in a short time. Multiple options designed to offer you the desired solution.
  • Details ...
Page 1 Of 22