Voltage transformer

Tags

Pulse Transformer with Single Secondary Winding

Pulse Transformer produced by Schaffner company is a component of industrial transformers in High voltage range up to 3000V and high frequency up to 500 KHz for data transmission. Pulse Transformers, commonly have 1:1 winding ratio but it can be possible to order 2:1 and 3:1 winding ratio. for example ordering code IT 260 have 3:1 winding ratio.

View Details

Pulse Transformer with Double Secondary Winding

Pulse Transformer produced by Schaffner company is a component of industrial transformers in High voltage range up to 500V and high frequency up to 500 KHz for data transmission. Pulse Transformers, commonly have 1:1 :1 winding ratio but it can be possible to order 2:1:1 and 3:1:1 winding ratio. for example ordering code IT 244 have 3:1:1 winding ratio.

View Details

Measuring Transformer

Part of DEIF’s current transformer range, the measuring transformers convert high current to lower nominal current value, thus making it possible to use instruments and relays with standardised values of rated current. DEIF offers 41 different physical sizes of the measuring transformers.

View Details

Power Current Transformer

The PCT is a combined transformer with both a voltage and a current output for DIN mounting.It decreases mounting space, minimises the numbers of connections on the terminals, and this reduces mounting costs.A fuse is directly mounted on the priamary conductor which gives a short unprotected part of the terminal and results in high reliability.

View Details

Primary winding current transformer

Based on the physical operating principle of current transformers, the required core volume transferring an amount of power, increases rapidly with a decreasing nominal current. As there are limits on increasing the transformer size, Primary winding current transformer are being used. Primary Winding Transformer, WSK, is the perfect choice for low currents in the range 1 A to 100 A.

View Details

Split Core Current Transformer

The compact SCT split-core current sensor from DEIF is especially designed for retrofitting on existing installations. The SCT series is supplied with color coded leads. The accuracy class 3 or 1 for all these CT’s is perfect for high accurate current measurements.Correct closing of the current sensor is guaranteed by a distinct sound of a “click”.

View Details

Split Core Transformer

DEIF’s split-core current transformers are cost-saving and easy-to-install units for responsible and efficient energy management solutions and for retrofitting existing installations. Because the split-core transformers can be mounted with a click and without interrupting the power supply, installation is smooth and executed in no time. KBU is the ideal split core transformer for retrofit projects where DEIF covers the range from 100 A to 5,000 A.

View Details

Protection current transformer

Protection current transformers are for the control of protecting relays which have the task to separate switched circuits in the event of over current. For a save function of these relays a proportional transfer ratio of the transformer up to a multiple of the nominal current is necessary. the protection transformers are used for overcurrent and earth fault protection in balanced protection systems. DEIF offers 15 different physical sizes of the protection transformers.The housing of the transformers is made of impact-resistant thermoplastic to ensure a highly reliable quality. The terminals of the transformers are protected by a cover.

View Details

Summation current transformer

Summation current transformers are suitable for the summation of several synchronized alternating currents with similar phases but with differing load phase shifts. It is also possible to have the summation of currents with varied nominal voltages of similar phase positions. Part of DEIF's current transformer range, the summation transformers summarise the secondary currents of any number of main current transformers to a common secondary signal . DEIF offers 2 different physical sizes of the summation transformers. The housing of the transformers is made of impact-resistant thermoplastic to ensure a highly reliable quality. The terminals of the transformers are protected by a cover.

View Details

Shunt Resistor

Shunts provide an accurate DC milivolt signal to drive moving-coil ammeters, overload protection and control units for higher ampere range. Shunt Resistors introduced by two generally type as 60 and 150 mV. Type 60 mV divided into A and B form. Also , Type 150mV divided into Three form as A , B and C.

View Details

PONOVO CT and PT Test Series Type PCT 200

These new CT/PT testers are based on low frequency and variable frequency methods which lead to the great reduction in weight and high knee point test range. With one button click, all test items of the current transformer test set, such as excitation, winding resistance, polarity, phase error, ratio, etc, can be performed automatically.

View Details