Related tags for:

Isolation

Visits times: 176
Isolator
  • Isolating amplifier Ziegler TV808 , finds its applications for isolation, amplification and conversion of DC signals .The DC signal isolator serves to electrically isolate the analog DC signal in the range from 0(4)-20mA which , depending on version, is then converted to a current signal 0(4)-20mA or voltage signal 0(2)-10V.
  • Details ...
Signal Isolator
  • Isolating amplifier Ziegler TI816 , finds its applications for isolation, amplification and conversion of DC signals .The DC signal isolator serves to electrically isolate the analog DC signal in the range from 0(4)-20mA which , depending on version, is then converted to a current signal 0(4)-20mA or voltage signal 0(2)-10V. It does not require a separate power supply .
  • Details ...
Transducer
  • The purpose of the Ziegler ZI11 is to electrically isolate input, output and power supply. The device has single channels and provides single independent isolating amplifiers in an extremely small space .
  • Details ...
Ziegler TI807 DC Signal Isolator
  • Isolating amplifier Ziegler TI807 , finds its applications for isolation, amplification and conversion of DC signals .The DC signal isolator serves to electrically isolate the analog DC signal in the range from 0(4)-20mA which , depending on version, is then converted to a current signal 0(4)-20mA or voltage signal 0(2)-10V. It does not require a separate power supply .
  • Details ...
Transmitter
  • The purpose of the Ziegler ZI12 is to electrically isolate input, output and power supply. The device has single channels and provides single independent isolating amplifiers in an extremely small space and two DC signal output .
  • Details ...
Isolator Transducer & Transmitter
  • isolators does not require a separate power supply, but derives the little auxiliary energy it needs from the DC signal . The DC signal isolator serves to electrically isolate the analog DC signal in the range from 0(4)-20 mA which, depending on version, is then converted to a current signal 0(4)-20 mA or voltage signal 0(2)-10 V.
  • Details ...
Isolation Transducer and Transmitter ZI11Ziegler
  • The purpose of the Ziegler ZI11 is to electrically isolate input, output and power supply. The device has single channels and provides single independent isolating amplifiers in an extremely small space .
  • Details ...
Insulation amplifier
  • TDG-210DG is a CE-marked DC/DC amplifier with galvanic separation between input and output. TDG-210DG requires auxiliary voltage and is fed through a transformer or a 24/48/110/220 V DC inverter.
  • Details ...
AC earth fault monitoring ISOPAK1
  • The purpose of ISOPAK1xx is to selectively detect and address earth faults in live 50 or 60 Hz networks. An intelligent highest up function highlights the highest level of hazard in the system, and only alerts the operator when conditions for an impending danger are present. SOPAK1xx can be configured for operation in FLOATING and GROUNDED single phase, 3-wire and 4 wire three phase AC networks.
  • Details ...
Earth current guard for systems with grounded neutral KOC105
  • KPC105x monitors leakage current in a grounded neutral network and provides earth current protection. The instrument measuring input is overload protected against high current .
  • Details ...
Page 1 Of 2