Related tags for:

شمارنده

Electromechanical Hours Counter
  • Electromechanical Hours Counter type HC 36/24 are applied for indication of the operating time (running hours) of all electrically driven machines and devices, e.g. electric motors, electric furnaces, central heating boilers, rectifiers. As the HC 36/24 is connected in parallel to the electric circuit of the equipment to be monitored, its counter only runs when the equipment is started. The HC 36/24 is CE-marked for residential, commercial and light industry plus industrial environment.
  • Details ...
Operating Hours Counter
  • Hour meters HC48 are designed for the determination and monitoring of operating time, warranty period and maintenance intervals on electrically driven machines and devices, mainly in mechanical processing, woodworking, textile and paper industry, on central heating boilers, electrical furnaces, power drives and rectifiers, and so on. Hour meters are connected in parallel to the control circuit behind the start gear, thus working only during the operation of a machine or device.
  • Details ...
kWh meter
  • The kWh meters types WQR96 MKII and WQ2R96 MKII are intended for energy measurement in single-phase and 3-phase networks, providing a class 1.0 measurement of the imported or exported energy. The meters are microprocessor controlled and equipped with a 7-digit electromechanical counter, which retains the reading in case of supply voltage failure. The meters are furthermore equipped with one or two pulse outputs. The meters can be adapted to the applied current transformers.
  • Details ...
Three Phase Power Analyzer
  • The MIC-2 MKII multi-instrument is a microprocessor based measuring unit providing measurement of most electrical quantities on a 2- or 3-phase electric energy distribution network. MIC-2 MKII can be used as a data logging device for an intelligent Power Distribution System or Plant Automation System. All measurements are monitored and data is available via the RS-485 Modbus port. Other communication types as Ethernet (Web page, TCP/IP Mod-bus and emails transfer) and Profibus DP are available options. True RMS values are measured with/without neutral and with both balanced and unbalanced load.
  • Details ...
DEIF Multi Instrument
  • The MIC multi-instrument is a microprocessor-based measuring unit providing measurement of all electrical quantities on a 3-phase electric energy distribution network. The measurements are shown on the built-in display. The MIC also has an RS485 interface that supports data exchange with a control system via Modbus RTU.
  • Details ...
Multi Instrument
  • The MIB multi-instrument is a microprocessor-based measuring unit providing measurement of most electrical quantities on a 3-phase electric energy distribution network. The measurements are shown on the built-in display. True RMS values on all 3-phase network topologies are measured with/without neutral and with both balanced and unbalanced load.
  • Details ...
Programmable Digital Meter of Pulse
  • The N30O meter is destined for the measurement of pulses, frequency, rotational speed, period and worktime. The meter has 2 counter inputs to cooperate with an encoder. The meter counts also the actual and total value.
  • Details ...
Three Phase Multi Meter
  • The ND20 meter, thanks to its design, available functions and communication possibilities is the ideal tool to control and monitor energy quality parameters and energy consumption in all industry branches, public utilities or in public service buildings.
  • Details ...
Portabler power quality analyzer
  • NP40 is the professional device to analyze the power system quality, supply the harmonics analysis and power quality data analysis, also provide big memory for the data storage, which is used to make the long term logger measuring to power system.
  • Details ...
LUMEL Multi Meter
  • The meter is distinguished by a high measurement accuracy, legible backlit LCD display and an attractive price. Meter is supplied from measurement circuit.
  • Details ...
Page 1 Of 2