Recorder

Tags

Electromechanical Hours Counter

Electromechanical Hours Counter type HC 36/24 are applied for indication of the operating time (running hours) of all electrically driven machines and devices, e.g. electric motors, electric furnaces, central heating boilers, rectifiers. As the HC 36/24 is connected in parallel to the electric circuit of the equipment to be monitored, its counter only runs when the equipment is started. The HC 36/24 is CE-marked for residential, commercial and light industry plus industrial environment.

View Details

Three Phase Power Analyzer

The MIC-2 MKII multi-instrument is a microprocessor based measuring unit providing measurement of most electrical quantities on a 2- or 3-phase electric energy distribution network. MIC-2 MKII can be used as a data logging device for an intelligent Power Distribution System or Plant Automation System. All measurements are monitored and data is available via the RS-485 Modbus port. Other communication types as Ethernet (Web page, TCP/IP Mod-bus and emails transfer) and Profibus DP are available options. True RMS values are measured with/without neutral and with both balanced and unbalanced load.

View Details

DEIF Multi Instrument

The MIC multi-instrument is a microprocessor-based measuring unit providing measurement of all electrical quantities on a 3-phase electric energy distribution network. The measurements are shown on the built-in display. The MIC also has an RS485 interface that supports data exchange with a control system via Modbus RTU.

View Details

Multi Instrument

The MIB multi-instrument is a microprocessor-based measuring unit providing measurement of most electrical quantities on a 3-phase electric energy distribution network. The measurements are shown on the built-in display. True RMS values on all 3-phase network topologies are measured with/without neutral and with both balanced and unbalanced load.

View Details

Digital Single Phase Meter

N30P meter is destined to measure: a.c. voltage, a.c. current, active, reactive and apparent power, cos φ, tg φ, φ, frequency, active, reactive and apparent energy, 15 min. active power, 10 min. voltage, 10 sec. frequency in single-phase power network.

View Details

Programmable Digital Meter of Pulse

The N30O meter is destined for the measurement of pulses, frequency, rotational speed, period and worktime. The meter has 2 counter inputs to cooperate with an encoder. The meter counts also the actual and total value.

View Details

Portabler power quality analyzer

NP40 is the professional device to analyze the power system quality, supply the harmonics analysis and power quality data analysis, also provide big memory for the data storage, which is used to make the long term logger measuring to power system.

View Details

Power Quality Analyzer

The ND1 3-phase power analyser is an up-to-date device allowing the user to measure and recording electrical energy quality parameters. It enables to detect interferences in internal industrial electric installations.

View Details

Energy performance data logger

ELOG is a unit for automatic remote retrieval, recording and storage of energy, climate and process data from meters, sensors, power monitors, PLCs, etc., connected to a communication network or equipped with pulse outputs.

View Details

Hour meter

Hour meter type COHO is applied for indication of the operating time (running hours) of all electrically driven machines and devices, e.g. electric motors, electric furnaces, central heating boilers, rectifiers. As the Hour meter is connected in parallel to the electric circuit of the equipment to be monitored, its counter only runs when the equipment is started.

View Details

Hour meter type LK

Hour meter type LK (7 or 8 digits) is applied for totaling the operating time of machines or equipment for control and maintenance. It can be installed easy and is a Economical hour meter.

View Details