Related tags for:

Lightning Arrester

Visits times: 521
Combination arrestor V25-B+C 4+FS-SÜ OBO
  • Lightning , Three-phase + neutral protection , with voltage monitoring , On the base of standard, the gap between surge arrestor Class B and Class C installed, must not be less than 10 meters. Observe the distance, the problems that are created due to make the boards for fixing it, "Combination arrestor B+C" can be used. Some Class B arrestors have certain technology, that Class C arrestor can be installed immediately next to it.
  • Details ...
Combination arrestor V25-B+C 4-FS-G OBO
  • Lightning , Three-phase + neutral protection , with remote signalling , On the base of standard, the gap between surge arrestor Class B and Class C installed, must not be less than 10 meters. Observe the distance, the problems that are created due to make the boards for fixing it, "Combination arrestor B+C" can be used. Some Class B arrestors have certain technology, that Class C arrestor can be installed immediately next to it.
  • Details ...
Combination arrestor PS4-B+C TT+TNS OBO
  • combination arrester , three-phase + neutral protection , as you know On the base of standard, the gap between surge arrestor Class B and Class C installed, must not be less than 10 meters. Observe the distance, the problems that are created due to make the boards for fixing it, "Combination arrestor B+C" can be used. Some Class B arrestors have certain technology, that Class C arrestor can be installed immediately next to it.
  • Details ...
LPS Lightning Rod ESE ELLIPS 1.2
  • LPS Active Lightning Protection ELLIPS 1.2 with ΔT = 25 µs , ΔL = 25 m
  • Details ...
LPS Lightning Rod ESE ELLIPS 1.3
  • LPS Capacitance Lightning Protection ELLIPS 1.3 with ΔT = 45 µs , ΔL = 45 m
  • Details ...
LPS Lightning Rod ESE ELLIPS 1.4
  • LPS Electrical Lightning Protection ELLIPS 1.4 with ΔT = 60 µs , ΔL = 60 m
  • Details ...
LPS Lightning Rod ESE ELLIPS 1.0
  • LPS Active Lightning Protection ELLIPS 1.0 with ΔT = 10 µs , ΔL = 10 m
  • Details ...
Surge Arrestrer
  • Arresters in electrical networks to protect equipment against damage caused by sudden over voltage such as lightning and thunder is used .
  • Details ...
Surge Arrester Class B, Type I
  • It can be used as the first phase of the protection circuit that can evacuate flows up to 100 kA with wave form 350/10μS. This equipment are installed on entrance of the building, before or after the meter or in main distribution boards and they have power to prevent a blow intermittent streams with high range of the lightning discharge will occur.
  • Details ...
Surge arrester MC 50-B-OS OBO
  • Lightning , protection of single-phase , with a visual representation of performance , as a first step that can be used in the protection circuit currents up to 50kA with waveform 10 / 350μS to move out . at the entrance of the building, before or after the meter or main distribution boards installed .
  • Details ...
Page 1 Of 12