Related tags for:

War

Visits times: 158
Multi-transducer
  • The MTR-3 is intended for measuring and monitoring single-phase or three-phase electrical power network. The MTR-3 measures RMS value by means of fast sampling of voltage and current signals, which makes the instrument suitable for acquisition of transient events. A built-in microcontroller calculates measurements (voltage, current, frequency, energy, power, power factor, THD phase angles, etc.) from the measured signals.
  • Details ...
kWh meter
  • The kWh meters types WQR96 MKII and WQ2R96 MKII are intended for energy measurement in single-phase and 3-phase networks, providing a class 1.0 measurement of the imported or exported energy. The meters are microprocessor controlled and equipped with a 7-digit electromechanical counter, which retains the reading in case of supply voltage failure. The meters are furthermore equipped with one or two pulse outputs. The meters can be adapted to the applied current transformers.
  • Details ...
Three Phase Power Analyzer
  • The MIC-2 MKII multi-instrument is a microprocessor based measuring unit providing measurement of most electrical quantities on a 2- or 3-phase electric energy distribution network. MIC-2 MKII can be used as a data logging device for an intelligent Power Distribution System or Plant Automation System. All measurements are monitored and data is available via the RS-485 Modbus port. Other communication types as Ethernet (Web page, TCP/IP Mod-bus and emails transfer) and Profibus DP are available options. True RMS values are measured with/without neutral and with both balanced and unbalanced load.
  • Details ...
DEIF Multi Instrument
  • The MIC multi-instrument is a microprocessor-based measuring unit providing measurement of all electrical quantities on a 3-phase electric energy distribution network. The measurements are shown on the built-in display. The MIC also has an RS485 interface that supports data exchange with a control system via Modbus RTU.
  • Details ...
Multi Instrument
  • The MIB multi-instrument is a microprocessor-based measuring unit providing measurement of most electrical quantities on a 3-phase electric energy distribution network. The measurements are shown on the built-in display. True RMS values on all 3-phase network topologies are measured with/without neutral and with both balanced and unbalanced load.
  • Details ...
Digital Single Phase Meter
  • N30P meter is destined to measure: a.c. voltage, a.c. current, active, reactive and apparent power, cos φ, tg φ, φ, frequency, active, reactive and apparent energy, 15 min. active power, 10 min. voltage, 10 sec. frequency in single-phase power network.
  • Details ...
Rail mounted Single phase power network meter
  • Designed for direct or indirect measurement of 1-phase network parameters: U, I, f, P, Q, S, PF, tg fi, fi, Ep, Eq. Thanks to modern design, N27P fulfills the requirements for devices mounted in standard modular switch gears.
  • Details ...
Multi Power Meter
  • Measurement and recording of 54 parameters, harmonics up to 51st, graphical screen-fully configurable by a user and very user- friendly www server interface - these are just some advantages of our new power network meter ND30 type.
  • Details ...
Portabler power quality analyzer
  • NP40 is the professional device to analyze the power system quality, supply the harmonics analysis and power quality data analysis, also provide big memory for the data storage, which is used to make the long term logger measuring to power system.
  • Details ...
Digital Three Phase Meter
  • The N14 meter is a programmable digital panel instrument destined for the measurement of 3-phase, 3 or 4-wire power network parameters, in balanced or unbalanced systems.
  • Details ...
Page 1 Of 3