Related tags for:

amplification and conversion of signals

Visits times: 27
Signal Isolator
  • Isolating amplifier Ziegler TI816 , finds its applications for isolation, amplification and conversion of DC signals .The DC signal isolator serves to electrically isolate the analog DC signal in the range from 0(4)-20mA which , depending on version, is then converted to a current signal 0(4)-20mA or voltage signal 0(2)-10V. It does not require a separate power supply .
  • Details ...
Ziegler TI807 DC Signal Isolator
  • Isolating amplifier Ziegler TI807 , finds its applications for isolation, amplification and conversion of DC signals .The DC signal isolator serves to electrically isolate the analog DC signal in the range from 0(4)-20mA which , depending on version, is then converted to a current signal 0(4)-20mA or voltage signal 0(2)-10V. It does not require a separate power supply .
  • Details ...
Transducer
  • The purpose of the Ziegler ZI11 is to electrically isolate input, output and power supply. The device has single channels and provides single independent isolating amplifiers in an extremely small space .
  • Details ...
Transmitter
  • The purpose of the Ziegler ZI12 is to electrically isolate input, output and power supply. The device has single channels and provides single independent isolating amplifiers in an extremely small space and two DC signal output .
  • Details ...
AC Transducer
  • Ziegler E15 measuring transducers are used to convert a sine wave or distorted AC current and AC voltage into an impressed load independent output signal. The output signal is proportional to the root mean square value of the input current and voltage.
  • Details ...
Ziegler E13 Three channel AC Voltage and Current Transducer and Transmitter
  • Ziegler E13 Three channel AC Voltage and Current Transducer and Transmitter measuring transducers are used to convert a sine wave or distorted AC current and AC voltage into an impressed load independent output signal. The output signal is proportional to the root mean square value of the input current and voltage. Other features of this device are : - DC current signal (load-independent) or DC voltage signal - Low power consumption / Smaller CT's & VT's can be used - Electric isolation between input / output and power supply (3.7 kV)
  • Details ...
Ziegler Pro-CA/CV Voltage and Current Transducer and Transmitter
  • The transducer Ziegler - CA/CV converts a sinusoidal or distorted AC Current or AC Voltage into a load independent DC Current or a load independent DC Voltage proportional to the measured value. PRO CA transducer with AC current measurement , in the range of 1 and 5 amps and PRO CV transducer with AC voltage measuring , in the range of 100, 110, 250, 400 volt are available.
  • Details ...
Isolation Transducer and Transmitter ZI11Ziegler
  • The purpose of the Ziegler ZI11 is to electrically isolate input, output and power supply. The device has single channels and provides single independent isolating amplifiers in an extremely small space .
  • Details ...
Page 1 Of 1