Related tags for:

ولتاژ

Ziegler V604-II programmable Transmitter
  • Programable universal transmitter , V604-II converts the variable - a DC current or voltage or a signal from a thermocouple , resistance thermometer , remote sensor or potentiometer to proportionate analogue output signal .
  • Details ...
Isolator
  • Isolating amplifier Ziegler TV808 , finds its applications for isolation, amplification and conversion of DC signals .The DC signal isolator serves to electrically isolate the analog DC signal in the range from 0(4)-20mA which , depending on version, is then converted to a current signal 0(4)-20mA or voltage signal 0(2)-10V.
  • Details ...
Transducer
  • The purpose of the Ziegler ZI11 is to electrically isolate input, output and power supply. The device has single channels and provides single independent isolating amplifiers in an extremely small space .
  • Details ...
Transmitter
  • The purpose of the Ziegler ZI12 is to electrically isolate input, output and power supply. The device has single channels and provides single independent isolating amplifiers in an extremely small space and two DC signal output .
  • Details ...
Digital Multifunction Meter & Energy Meter
  • Digital Panel Meter are using to read measured values of DC and AC parameters of current, voltage, frequency, Watt, Var,power factor and temperature. The meters are displaying values on Seven segments .
  • Details ...
Signal Isolator
  • Isolating amplifier Ziegler TI816 , finds its applications for isolation, amplification and conversion of DC signals .The DC signal isolator serves to electrically isolate the analog DC signal in the range from 0(4)-20mA which , depending on version, is then converted to a current signal 0(4)-20mA or voltage signal 0(2)-10V. It does not require a separate power supply .
  • Details ...
Harmonic Active Filter
  • ECOsine harmonic filters represent an economical solution to the challenge of load-applied harmonics mitigation in three-phase power systems.The active filter instantly adapts to all changes in the load and the systems harmonic content spectrum, in order to be able to optimally respond at any time.
  • Details ...
DC Multifunction meter
  • Ziegler EM DC series is specially designed to measure, display and communicate DC Voltage, Current, Power and Energy to monitor and control the target system. It can be mentioned as its applications in below : -Solar Photovoltaic Systems -Battery chargers and systems -Wind Power Generation -Electroplating Industries -Power Distribution for Telecommunication -Industrial DC control Systems
  • Details ...
Power Current Transformer
  • The PCT is a combined transformer with both a voltage and a current output for DIN mounting.It decreases mounting space, minimises the numbers of connections on the terminals, and this reduces mounting costs.A fuse is directly mounted on the priamary conductor which gives a short unprotected part of the terminal and results in high reliability.
  • Details ...
Selectable AC transducer
  • TAS-311DG is a micro-controller based AC transducer with 1 analogue output for measurement of RMS voltages, RMS current, phase angle or frequency on an AC-network. TAS-311DG can be delivered pre-configured or it can be delivered unconfigured for customer configuration through the PC interface. The PC configuration software allows free choice of voltage, current, phase angle or frequency measurement including configuration of the measuring range and output range without any mechanical settings or adjustments inside the transducer. The transducer holds no mechanical moving parts like potentiometers, and the calibration stability is excellent.
  • Details ...
Page 1 Of 15