Isolator

Tags

Electrical Transducers & Isolator

A transducer, by definition ,it is an Instrument has Responsibility of transforming a physical quantity into an electrical signal . The most common parameters are measured by the transducer are, position, force, speed, acceleration, pressure, level , liquids flow and temperature . Transducer's outputs are , voltage, current, resistance, capacitance and frequency.

View Details

Voltage & Current Transducers/Transmitter

Voltage & current Transducer for AC & DC circuits are used for measuring direct, sine wave and distorted signals. the output signal is proportional to the root mean square value of the input current and voltage .

View Details

DC Transducer & Transmitter

DC current and voltage transducers are appropriate for reception different current and voltage input signals and converting to DC output signals with various amounts.

View Details

Ziegler V604-II programmable Transmitter

Programable universal transmitter , V604-II converts the variable - a DC current or voltage or a signal from a thermocouple , resistance thermometer , remote sensor or potentiometer to proportionate analogue output signal .

View Details

Signal Isolator

Isolating amplifier Ziegler TI816 , finds its applications for isolation, amplification and conversion of DC signals .The DC signal isolator serves to electrically isolate the analog DC signal in the range from 0(4)-20mA which , depending on version, is then converted to a current signal 0(4)-20mA or voltage signal 0(2)-10V. It does not require a separate power supply .

View Details

Ziegler TI807 DC Signal Isolator

Isolating amplifier Ziegler TI807 , finds its applications for isolation, amplification and conversion of DC signals .The DC signal isolator serves to electrically isolate the analog DC signal in the range from 0(4)-20mA which , depending on version, is then converted to a current signal 0(4)-20mA or voltage signal 0(2)-10V. It does not require a separate power supply .

View Details

Transducer

The purpose of the Ziegler ZI11 is to electrically isolate input, output and power supply. The device has single channels and provides single independent isolating amplifiers in an extremely small space .

View Details

Transmitter

The purpose of the Ziegler ZI12 is to electrically isolate input, output and power supply. The device has single channels and provides single independent isolating amplifiers in an extremely small space and two DC signal output .

View Details

AC Transducer

Ziegler E15 measuring transducers are used to convert a sine wave or distorted AC current and AC voltage into an impressed load independent output signal. The output signal is proportional to the root mean square value of the input current and voltage.

View Details

Active and Re-Active Programmable Transducer

The Ziegler PRO - P transducer is used to measure and convert active, reactive, apparent power, Phase angle & Power Factor of a Single-phase or Three-phase AC system with balanced or unbalanced load into a proportional load independent DC current or voltage output signal .

View Details

Ziegler E13 Three channel AC Voltage and Current Transducer and Transmitter

Ziegler E13 Three channel AC Voltage and Current Transducer and Transmitter measuring transducers are used to convert a sine wave or distorted AC current and AC voltage into an impressed load independent output signal. The output signal is proportional to the root mean square value of the input current and voltage. Other features of this device are : - DC current signal (load-independent) or DC voltage signal - Low power consumption / Smaller CT's & VT's can be used - Electric isolation between input / output and power supply (3.7 kV)

View Details

Current Transducer and Transmitter XD Series

XD Transducers are the simplest devices possible for measuring current or monitoring consumption . with Quick to Install (No external CTs required) .

View Details