Related tags for:

منبع تغذیه

Battery Charger
  • The DBC-1 can be used as DC supply due to the low ripple of maximum 1.3%. Automatic recovery and protection against overload, short circuit and reverse polarity are standard functionalities of the DBC-1. It is designed to charge both lead-acid and gel batteries. The recommended charge voltage for each cell in a lead battery is 2.3 V. With 6 cells, the charge voltage will be 13.8 V, and with 12 cells it will be 27.6 V. These levels are the default settings of the DBC-1 for 12 V and 24 V applications. The value of 2.3 V is also called the float charge of the battery. The float charge is the recommended charge voltage to maintain the capacity of the battery.
  • Details ...
Battery Charger and Power Supply
  • The DCP2 can be applied as battery charger or stabilized network component as a universal DC voltage supply. As battery charger parallel operation with other DC consumers is possible. Using switch mode technology to ensure an extremely low ripple, the DCP2 is a safe choice both as a battery charger and/or a DC power supply.Furthermore high efficiency, protections and low weight are key words in most applications.
  • Details ...
Three channele AC earth fault guard
  • The three channel digitally controlled KCM363x monitors up to three earth current channels in a non-grounded (IT) or grounded TN network and its protective earth. Unit can be used for either Restricted or Unrestricted earth fault detection.There is individual relay for alarm or trip of load breaker.
  • Details ...
single phase power switching supply, PS1 - 505
  • Single phase switch- made power supply (SMPS) is used to produce electrical energy for one or more demanding loads. This equipment produced energy with high efficiency and low loss power. The output voltage of single phase power switching supply, type PS1 - 505 is 5 volt dc and the output current is 5 A.
  • Details ...
J. Schneider
  • J. Schneider is a leading suppliers of different types of transformers, Power switching supplies, DC and AC UPS. J. Schneider companies are located in USA and Germany.
  • Details ...
UNOTEC 2420N (J.Schneider)
  • The UNOTEC 2420N is a switch mode power supply of the latest generation, which is characterized by its high efficiency and minimum power loss. Operation in series (2 units max.) and parallel operation (up to 5 devices) are possible.
  • Details ...
UNOTEC 2410N (J.Schneider)
  • The UNOTEC 2410N is a switch mode power supply of the latest generation, which is characterized in its high efficiency and minimum power loss. Operation in series (2 units max.) and parallel operation (up to 5 devices) are possible.
  • Details ...
single phase power switching supply, PS1 - 1206
  • Single phase switch- made power supply (SMPS) is used to produce electrical energy for one or more demanding loads. This equipment produced energy with high efficiency and low loss power. The output voltage of single phase power switching supply, type PS1 -1206 is 12 volt dc. The output current is 6 A.
  • Details ...
single phase power switching supply, PS1-1216
  • Single phase switch- made power supply (SMPS) is used to produce electrical energy for one or more demanding loads. This equipment produced energy with high efficiency and low loss power. The output voltage of single phase power switching supply, type PS1-1216 is 12 volt dc and the current is 16A.
  • Details ...
single phase power switching supply, PS1-1214
  • Single phase switch- made power supply (SMPS) is used to produce electrical energy for one or more demanding loads. This equipment produced energy with high efficiency and low loss power. The output voltage of single phase power switching supply, type PS1 - 1214 is 12 volt dc and the current is 14 A.
  • Details ...
Page 1 Of 3