Converter

Tags

Ziegler V604-II programmable Transmitter

Programable universal transmitter , V604-II converts the variable - a DC current or voltage or a signal from a thermocouple , resistance thermometer , remote sensor or potentiometer to proportionate analogue output signal .

View Details

Isolator

Isolating amplifier Ziegler TV808 , finds its applications for isolation, amplification and conversion of DC signals .The DC signal isolator serves to electrically isolate the analog DC signal in the range from 0(4)-20mA which , depending on version, is then converted to a current signal 0(4)-20mA or voltage signal 0(2)-10V.

View Details

Signal Isolator

Isolating amplifier Ziegler TI816 , finds its applications for isolation, amplification and conversion of DC signals .The DC signal isolator serves to electrically isolate the analog DC signal in the range from 0(4)-20mA which , depending on version, is then converted to a current signal 0(4)-20mA or voltage signal 0(2)-10V. It does not require a separate power supply .

View Details

Transducer

The purpose of the Ziegler ZI11 is to electrically isolate input, output and power supply. The device has single channels and provides single independent isolating amplifiers in an extremely small space .

View Details

Ziegler TI807 DC Signal Isolator

Isolating amplifier Ziegler TI807 , finds its applications for isolation, amplification and conversion of DC signals .The DC signal isolator serves to electrically isolate the analog DC signal in the range from 0(4)-20mA which , depending on version, is then converted to a current signal 0(4)-20mA or voltage signal 0(2)-10V. It does not require a separate power supply .

View Details

Transmitter

The purpose of the Ziegler ZI12 is to electrically isolate input, output and power supply. The device has single channels and provides single independent isolating amplifiers in an extremely small space and two DC signal output .

View Details

RS-485 to RS-232 Converter

This converter is suitable for the following applications : Convert RS-485 signals to RS-232 signals , SCADA systems , PLC Systems , Measurement systems and communications processor , Remote systems .

View Details

USB to RS-485 Converter Strip

This is a compact converter to convert USB signals to RS-485 signals, is used for connecting the RS-485 port to the USB port. This is not an isolated output modules and an additional COM port for the PC .

View Details

Ziegler Pro-CA/CV Voltage and Current Transducer and Transmitter

The transducer Ziegler - CA/CV converts a sinusoidal or distorted AC Current or AC Voltage into a load independent DC Current or a load independent DC Voltage proportional to the measured value. PRO CA transducer with AC current measurement , in the range of 1 and 5 amps and PRO CV transducer with AC voltage measuring , in the range of 100, 110, 250, 400 volt are available.

View Details

Active/Reactive Power Transducers & Transmitter

Active / Reactive Power Transducer are used for measuring and converting active power and reactive power of a single/three phase system with balanced or unbalanced load into proportion load independent DC current or voltage.

View Details

Ziegler Pro I/V Voltage and Current Transducer and Transmitter

Ziegler PRO - I / V transducer is used to measure and convert AC Voltage or Current input into a load independent DC current or voltage output signal . Output signal generated is proportional to the root mean square value of the input Current or Voltage . PRO I transducer with AC current measurement , in the range of 1 and 5 amps and PRO V transducer with AC voltage measuring , in the range of 57...500 volt are available.

View Details

Current Transducer and Transmitter XD Series

XD Transducers are the simplest devices possible for measuring current or monitoring consumption . with Quick to Install (No external CTs required) .

View Details