Megacon Company

Country: NorwayYear: 1974

Megacon is founded 1974 in Bergen, Norway by Asbjørn Geber.MEGACON is an international group of fully owned and associated companies, who in partnership bring together their commercial and multi-disciplinary technical competence, experience and knowledge to design, manufacture and market innovative electronic products. products: 1-Insulation Monitoring 1-1-Guards AC 1-2-Transducers AC 1-3-Trip Relays AC 1-4-Guards DC 1-5-Trip Relays Live DC 1-6-Trip Relay Non-Live DC 1-7-High Voltage AC Adaptors 2-Earth Fault Monitoring 2-1-Earth Fault Monitoring 2-2-Earth Fault Guards AC 2-3-Earth Fault Trip Relays AC 2-4-Earth Fault Indicator 2-5-IGTx & IGRx Transformers 2-6-Impedance Module 3-Earth Fault Protection 3-1-Earth Fault Protection AC 4-Controllers and Guards 4-1-Active Power Guards 4-2-Reactive Power Guards 4-3-Analouge Controllers 5-Current Guards AC 5-1-Single Phase Current Guards 5-2-Three Phase Current Guards 5-3-Current Differential Guards 5-4-Current Imbalance Guards 6-Generator Protection 6-1-KEC115/6/7x - KCC115/6/7x 6-2-KPW17x - KCW17x 6-3-KPVA17x - KCVA17x 6-4-MAG10x 6-5-KPC112x - KCC112x 6-6-TSU17x 7-Generator Controls 7-1-Generator Controllers 7-2-Electronic Potentiometers 8-Synchronisers 8-1-SECTOR Synchronisation 8-2-SPOT ON Synchronisation 8-3-Bus/Gen Coupler 8-4-Sync/Gen Controller 8-5-Synchronisation Indicators 8-6-Voltage Comparator 9-Freq. & Voltage Guards 9-1-Combined Freq. & Volt. G. 9-2-Frequency Guards 9-3-Voltage Guards 10-Phase Sequence Control 10-1-Phase Monitoring Guards 10-2-Phase Sequence Relays 11-Loss of Mains Protection 11-1-Single Phase 11-2-Three Phase 3-wire 11-3-Three phase 4-wire 11-4-Programmer Units 12-Measuring Transducers 12-1-Current Transducers 12-2-Frequency Transducers 12-3-kW and kVAr Transducers 12-4-Voltage Transducers 12-5-Signal Isolator 13-Temperature Guards 13-1- 1 Ch. Temperature Guard 13-2- 3 Ch. Temperature Guard 13-3- 3 Ch. Temperature Relay 14-Current Transformers 14-1-Measurement and Protection 15-Panel Instruments 15-1-Ammeters 15-2-Frequency Meters 15-3-kW and kVAr Meters 15-4-Multi Instrument 15-5-Phase Sequence Indicators 15-6-Voltmeteres 16-Switches 17-Shunts 18-Power & Test Equipment 18-1-Power Test Simulator 18-2-Earth Leakage Detector 19-Dewpoint & Hygrometers 19-1-Portable Analysers 19-2-Single Channel Analysers 19-3-Dewpoint Transmitters Borna niroo karan company (Brnika) is Exclusive Representative of Megacon , in the purchase, sales, consulting and distribution and industrial equipment and measurement equipment, including panel instruments, test and power tools, relays, voltage and current gurds and so is active .

Megacon Products

Three phase line reactor

AC line reactors are added to the input of the drive and placed in series with the incoming line. They help to mitigate harmonics and because they are between the line and the drive, they are able to act as a buffer for surges and other transients. The intended purpose of a line reactor is not to offer high levels of surge protection and, if greater protection is desired, a dedicated protective device is a much better solution.

Show Detail

Active Filter

ECOsine harmonic Active filter represents an economical solution to the challenge of load-applied harmonics mitigation in three-phase power systems.The active filter instantly adapts to all changes in the load and the systems harmonic content spectrum, in order to be able to optimally respond at any time.

Show Detail

Passive Filter

FN 3416 (50 Hz) models of the ECOsine product family represent the very compact “economy line” with a THID performance of ≤10 % (with Ldc). They are ideal for non-linear three-phase equipment with B6 rectifier front-end that do not require the industry leading <5 % THID performance provided by Schaffner ECOsine.

Show Detail

Enclosed High Power Filter

Schaffner ECOsine filter cabinets (Filters for diode rectifiers) can be applied to virtually any kind of power electronics with front-end six-pulse rectifiers, where harmonic current distortion needs to be reduced to defined limits. The compact filter cabinets can be easily commissioned and quickly installed into extisting designs without requiring an in-depth system analysis or highly trained specialists.

Show Detail

Three Phase Passive Filter

Schaffner ECOsine harmonic filters represent an economical solution to the challenge of load-applied harmonics mitigation in three-phase power systems. With a plug-and-play approach and more compact dimensions than comparable products, they can be quickly installed and easily commissioned. They increase the reliability and service life of electric installations, help utilize electric sytem capacity better, and are the key to meet Power Quality standards such as IEEE 519.

Show Detail

High Voltage Harmonic Filter

Full Performance High Voltage Harmonic Filter uses for high voltage diode and thyristor rectifiers. High Voltage Full Performance Filter of schaffner company are suitable for harmonic elimination in electrical systems that they have fast variable loads with high dynamic behavior .

Show Detail

Compact filtered power entry module

The FN 280 power entry module combines an IEC inlet, a mains filter with single or dual- fuse holder and a 2-pole rocker switch in a small form factor. Choosing FN 280 product line brings you the rapid availability of a standard filter associated with the necessary safety acceptances. Standard IEC connector filters are a practical solution helping you to pass EMI system approval in a short time. A wide selection on amperage ratings, fuse options, mounting possibilities and filters for medical applications are designed to offer you the desired solution.

Show Detail

General Purpose EMI Filter

General Purpose EMI Filter produced by Scahffner company are designed for easy and fast chassis mounting. FN 2010 filters are also available as B versions without Y-capacitors for medical applications as well as A version with low capacitance for safety critical applications with necessity for low leakage.

Show Detail

IEC C13 Rewireable Connector for individual Power Cord with Locking System

IEC C13 Rewireable Connector produced by Schaffner company is versatile with IEC standards and it is suitable for EMC/EMI filters. The locking system has a tensile force of typical 300N. It is recommended to use it with flange mount filters.

Show Detail

Multi-stage General Purpose EMI Filter

Multi-stage General Purpose EMI Filter produced by Scahffner company are designed for easy and fast chassis mounting. FN 2010 filters are also available as B versions without Y-capacitors for medical applications as well as A version with low capacitance for safety critical applications with necessity for low leakage.

Show Detail