In these meters, the maximum deviation of pointer is 240 degrees, that for each 240 degrees, the analog meter displays the maximum amount of measurement quantities. When the analog meters are in “zero center” mode , the quantity of final deviation is 120 degrees and in two directions. Bornika is the exclusive agent of Zeigler in the fields of consulation, sales and distribution of power industry products including DC Meter and AC Meter.

User visits: 222

Sub Categories
Products
  • Model: DSL
  • Order code: DSL 48 | DSL 72 | DSL 96 | DSL 144
  • Brand:
  • Country: Germany
  • Analog 240° Panel Ammeter/Voltmeter , DSL 48/72/96,144 housed in moulded polycarbonate cases are suitable for the measurement of DC currents and voltages . These instruments offer several advantages in switchboard and Generating Set Panels .

  • Model: DQ
  • Order code: DQtt No: 29610yyyyy -zz ; DQtt-c/-xc No:29610yyyyy-zz
  • Brand:
  • Country: Denmark
  • The moving coil meters are applied to measure low power DC signals, for example 0 to 1 mA/4 to 20 mA/0 to 10V DC etc. DQ is available in four different sizes, in other words 48 mm, 72 mm, 96 mm and 144 mm.

  • Model: VAGL
  • Order code: VAGL
  • Brand:
  • Country: Poland
  • VAGL meters with built-in rectifiers are used for measurement of the rectified current or voltage arithmetical mean value and they are such calibrated that they indicate the RMS value at sinusoidal curve shape.

  • Model: VAML
  • Order code: VAML
  • Brand:
  • Country: Poland
  • Moving-coil meters VAML types are destined to measure d.c. voltage or d.c. current.

  • Model: DGL
  • Order code: DGL 48 | DGL 72 | DGL 96 | DGL 144
  • Brand:
  • Country: Germany
  • Analog 240° Panel Ammeter/Voltmeter , DGL 48/72/96,144 housed in moulded polycarbonate cases are suitable for the measurement of AC currents and voltages. These instruments offer several advantages in switchboard and Generating Set Panels . measure average values & are calibrated to indicate RMS values, assuming a sinusoidal waveform for frequencies from 40 to 10000 Hz (AC current - 40 to 1000 Hz and AC voltage - 40 to 10000 Hz)

  • Model: FML
  • Order code: FML 96 | FML 144
  • Brand:
  • Country: Germany
  • The pointer type frequency meters , FML 96 and FML 144 housed in moulded polycarbonate cases are used for the measurement of frequencies in the range of 45 to 450 Hz . These instruments offer several advantages in switchboards and Generating Set Panels .

  • Model: LML
  • Order code: LML 96 | LML 144
  • Brand:
  • Country: Germany
  • The Watt and Var meters , LML are offered for the following AC systems , single phase , 3 phase balanced load 3 or 4 wire , 3 phase unbalanced load 3 or 4 wire . LML 96 | 144 housed in moulded polycarbonate cases are suitable for the measurement of active and reactive power . They can be used both on sinusoidal and non-sinusoidal current .

  • Model: LFL
  • Order code: LFL 96 | LFL 144
  • Brand:
  • Country: Germany
  • LFL Analog 240° Panel Power factor meter is indirectly determined by measuring the phase angle between current and voltage (both sinusoidal) . suitable for power factor changes. The meter in sizes 72, 96 and 144 have been produced in the form of polycarbonate .

  • Model: VAPL
  • Order code: VAPL
  • Brand:
  • Country: Poland
  • VAPL power meter is dedicated to measure active or reactive power in 1 and 3-phase power networks.

  • Model: VAQL
  • Order code: VAQL
  • Brand:
  • Country: Poland
  • Power factor meters VAQL type are destined to measure the phase angle difference between the voltage and the current in 1-phase or 3-phase a.c. power networks.

Page 1 From 1