Measuring Instrument

Visits : 2296
Measuring Instrument

Measuring Instruments are applicable for measurement and monitoring the quantities such as voltage, current, active power, reactive power, frequency, power factor, temp, humidity and etc. Bornika is the exclusive agent of Zeigler , Enerdis , Contrel , Crompton, ZURC, DEIF and MEGACON in the fields of consultation , sales and distribution of power industry products including Analog Panel Meter, Complete set of Synchronized , Digital Panel Meter, Digital Multifunction Meter & Energy Meter, Digital Insulation & Continuity Tester, Digital Multimeter & Clamp .

Products

DC Shunts

DC shunts convert high value current in DC circuits into proportional voltage drop (50mV/60mV/75mV/150mV) which can be connected of DC voltmeters to measure the high value current.

Show Detail

Enerdis DC current shunt

Enerdis DC current shunt used for measuring high currents in DC networks. enerdis shunts are available in five following models: 76-2:with Eye connection, Eye connection on base 77-2: with Plate connection for busbar SHMI: with Screw, Eye and to block for busbar connection SHEL: with Direct connection to measuring component Enerdis DC shunts are available in 1A to 6000A with voltage drops: 50 mV - 60 mV - 100 mV - 150 mV - 200 mV - 300 mV - 1 V

Show Detail

Ziegler ZiS 4.21B Current Transformer

Ziegler ZiS 4.21B Current Transformer, is one of the cable and busbar primer low voltage current transformer type and is used for measuring current.

Show Detail

RITZ KS 50-02 Current Transformer

The active part consists of a toroidal core and a secondary winding. It is completely enclosed by the two parts of the housing and vibration-proof assembled . The housing is made of poly carbonate . The secondary terminals are made of nickel plated brass . Mounting: In any position . If no burden is connected , secondary terminals have to be short-circuited . with primary winding current range of 50A-600A .

Show Detail

LUMEL Current Transformer

Current transformers LCTM series have own primary winding. The clamps of primary winding are in the upper part of the current transformer, next to the clamps of the secondary winding.

Show Detail

Analog Panel Ammeter/Voltmeter

DS 48/72/96/144 housed in moulded polycarbonate cases are suitable for the measurement of DC currents and voltages .

Show Detail

AC Ammeter/Voltmeter

Analog Panel meters , DE 48/72/96/144 housed in moulded polycarbonate cases are suitable for the measurement of AC currents for frequency range of 15...400Hz and voltages in the frequency range of 15...100Hz . Analog Panel meters indicate rms-values practically independent of waveform even of high harmonics .

Show Detail

Ziegler DSL Analog 240° Panel Ammeter/Voltmeter

Analog 240° Panel Ammeter/Voltmeter , DSL 48/72/96,144 housed in moulded polycarbonate cases are suitable for the measurement of DC currents and voltages . These instruments offer several advantages in switchboard and Generating Set Panels .

Show Detail

analog Ammeter

Analog 240° Panel Ammeter/Voltmeter , DGL 48/72/96,144 housed in moulded polycarbonate cases are suitable for the measurement of AC currents and voltages. These instruments offer several advantages in switchboard and Generating Set Panels . measure average values & are calibrated to indicate RMS values, assuming a sinusoidal waveform for frequencies from 40 to 10000 Hz (AC current - 40 to 1000 Hz and AC voltage - 40 to 10000 Hz)

Show Detail

DC Ammeter

Digital Panel Meter are using to read measured values of DC . The DC Digital Panel Meter come in 5 standard sizes 24x48, 24x96, 48x96, 96x96, 72x144 mm. The DC DPM's are designed for industrial applications which require precise and onsite adjustment for display ranges . The meters are displaying values on Seven segments .

Show Detail

Digital Panel Ammeter/Voltmeter

The digital panel meter DPM have been designed for industrial applications, which frequently require precise and on site adjustment of the display range . It can be used in industrial automation and for laboratory uses . DPM measures important electrical parameters in 3 phase 4 Wire, 3 phase 3 Wire and single phase Network & replaces the multiple analog panel meters .

Show Detail

Digital Multimeter

RA -10 digital multimeters are suited for universal, general applications in the electrical and electronics fields, as well as in radio and television service, training and education.They are of especially flat design, and thus fit into any bag.The protective cover, which is provided as standard equipment, can be opened at an angle for convenient reading from the workbench, and provides for easy transport.

Show Detail