harmonic filters

Visits : 543
harmonic filters

harmonic filter applications are in Industrial installations with a set of non-linear loads such as variable-speed drives, UPSs, rectifiers and etc, Installations where current distortion must be reduced to avoid overloads and Installations where voltage distortion must be reduced to avoid disturbing sensitive loads. The benefits of harmonic filtering are not limited to preventing equipment failure , but it can also improves your total power factor. With improved power factor, inductive reactive power, from the supply decreases and additional savings in the form of reduced tariffs may be achieved. harmonics are influence on capacitors.Harmonics on the supply cause a higher current to flow in the capacitors. This is a result of the capacitors having lower impedance as the frequency increases. This increase in current flow through to the capacitor will result in additional heating of the capacitor and will reduce its life. Bornika is the exclusive agent of Schaffner in the fields of consultation , sales and distribution of power industry products including harmonic filters .

Products

Three phase line reactor

Model: RWK 212 Order code: RWK 212-x-x

AC line reactors are added to the input of the drive and placed in series with the incoming line. They help to mitigate harmonics and because they are between the line and the drive, they are able to act as a buffer for surges and other transients. The intended purpose of a line reactor is not to offer high levels of surge protection and, if greater protection is desired, a dedicated protective device is a much better solution.

Show Detail

Active Filter

Model: FN-3420 Order code: FN-3420-x-y-z

ECOsine harmonic Active filter represents an economical solution to the challenge of load-applied harmonics mitigation in three-phase power systems.The active filter instantly adapts to all changes in the load and the systems harmonic content spectrum, in order to be able to optimally respond at any time.

Show Detail

Three Phase Harmonic Filter

Model: FN-3420 Order code: FN-3420-x-y-z

ECOsine three phase harmonic filters represent an economical solution to the challenge of load-applied harmonics mitigation in three-phase power systems.The active filter instantly adapts to all changes in the load and the systems harmonic content spectrum, in order to be able to optimally respond at any time.

Show Detail

Harmonic Elimination Filter

Model: FN-3420 GL Order code: FN-3420-x-y-z

ECOsine harmonic filters represent an economical solution to the challenge of load-applied harmonics mitigation in three-phase power systems.The active filter instantly adapts to all changes in the load and the systems harmonic content spectrum, in order to be able to optimally respond at any time.

Show Detail

Harmonic Active Filter

Model: FN-3430 Order code: FN-3430-x-y-z

ECOsine harmonic filters represent an economical solution to the challenge of load-applied harmonics mitigation in three-phase power systems.The active filter instantly adapts to all changes in the load and the systems harmonic content spectrum, in order to be able to optimally respond at any time.

Show Detail

Passive Filter

Model: FN 3416 Order code: FN 3416-x-y

FN 3416 (50 Hz) models of the ECOsine product family represent the very compact “economy line” with a THID performance of ≤10 % (with Ldc). They are ideal for non-linear three-phase equipment with B6 rectifier front-end that do not require the industry leading <5 % THID performance provided by Schaffner ECOsine.

Show Detail

Enclosed High Power Filter

Model: FN 3410 Order code: FN 3410-x-99-Ey

Schaffner ECOsine filter cabinets (Filters for diode rectifiers) can be applied to virtually any kind of power electronics with front-end six-pulse rectifiers, where harmonic current distortion needs to be reduced to defined limits. The compact filter cabinets can be easily commissioned and quickly installed into extisting designs without requiring an in-depth system analysis or highly trained specialists.

Show Detail

Three Phase Passive Filter

Model: FN 3410 Order code: FN 3410-x-y

Schaffner ECOsine harmonic filters represent an economical solution to the challenge of load-applied harmonics mitigation in three-phase power systems. With a plug-and-play approach and more compact dimensions than comparable products, they can be quickly installed and easily commissioned. They increase the reliability and service life of electric installations, help utilize electric sytem capacity better, and are the key to meet Power Quality standards such as IEEE 519.

Show Detail

High Voltage Harmonic Filter

Model: FN3410 HV 610 Order code: FN3410HV-x-y

Full Performance High Voltage Harmonic Filter uses for high voltage diode and thyristor rectifiers. High Voltage Full Performance Filter of schaffner company are suitable for harmonic elimination in electrical systems that they have fast variable loads with high dynamic behavior .

Show Detail

Three Phase Harmonic Filter

Model: FN 3411 Order code: FN 3411-x-y

Schaffner ECOsine harmonic filters represent an economical solution to the challenge of load-applied harmonics mitigation in three-phase power systems. With a plug-and-play approach and more compact dimensions than comparable products, they can be quickly installed and easily commissioned. They increase the reliability and service life of electric installations, help utilize electric sytem capacity better, and are the key to meet Power Quality standards such as IEEE 519.

Show Detail

High Power Filter

Model: FN 3410 Order code: FN 3410-x-99-O

Schaffner ECOsine filter cabinets (Filters for diode rectifiers) can be applied to virtually any kind of power electronics with front-end six-pulse rectifiers, where harmonic current distortion needs to be reduced to defined limits. The high power filter modules are particularly suitable when no room for packaged filters is available. The Schaffner solution can conveniently be incorporated into cabinets, which allow the filter components to be wired along with the overall electrical wiring job and to be cooled by jointly utilizing the overall cooling concept.

Show Detail

Harmonic Filter

Model: FN 3416 LV Order code: FN 3416LV-x-y

FN 3416 (50 Hz) models of the ECOsine product family represent the very compact “economy line” with a THID performance of ≤7 % (with Ldc).

Show Detail