Filter

Visits : 917
Filter

In order to help to improve the quality of electricity and the availability of electrical supplies, various kinds of filter are applied. Better power quality supports savings in electricity consumption and costs, a higher efficiency of electrical equipment and an extended life expectancy of sensitive electronic. Active and Passive Filters play important role in source and load side. Power Magnets and EMC/EMI filters can be mentioned in this category. Bornika is the exclusive agent of Schaffner and ZEZ Silko companies and sales agent of Murrelectronic company in the fields of consultation , sales and distribution of active and passive filters .

Products

Three phase line reactor

AC line reactors are added to the input of the drive and placed in series with the incoming line. They help to mitigate harmonics and because they are between the line and the drive, they are able to act as a buffer for surges and other transients. The intended purpose of a line reactor is not to offer high levels of surge protection and, if greater protection is desired, a dedicated protective device is a much better solution.

Show Detail

Active Filter

ECOsine harmonic Active filter represents an economical solution to the challenge of load-applied harmonics mitigation in three-phase power systems.The active filter instantly adapts to all changes in the load and the systems harmonic content spectrum, in order to be able to optimally respond at any time.

Show Detail

Passive Filter

FN 3416 (50 Hz) models of the ECOsine product family represent the very compact “economy line” with a THID performance of ≤10 % (with Ldc). They are ideal for non-linear three-phase equipment with B6 rectifier front-end that do not require the industry leading <5 % THID performance provided by Schaffner ECOsine.

Show Detail

High Voltage Harmonic Filter

Full Performance High Voltage Harmonic Filter uses for high voltage diode and thyristor rectifiers. High Voltage Full Performance Filter of schaffner company are suitable for harmonic elimination in electrical systems that they have fast variable loads with high dynamic behavior .

Show Detail

Compact filtered power entry module

The FN 280 power entry module combines an IEC inlet, a mains filter with single or dual- fuse holder and a 2-pole rocker switch in a small form factor. Choosing FN 280 product line brings you the rapid availability of a standard filter associated with the necessary safety acceptances. Standard IEC connector filters are a practical solution helping you to pass EMI system approval in a short time. A wide selection on amperage ratings, fuse options, mounting possibilities and filters for medical applications are designed to offer you the desired solution.

Show Detail

Enclosed High Power Filter

Schaffner ECOsine filter cabinets (Filters for diode rectifiers) can be applied to virtually any kind of power electronics with front-end six-pulse rectifiers, where harmonic current distortion needs to be reduced to defined limits. The compact filter cabinets can be easily commissioned and quickly installed into extisting designs without requiring an in-depth system analysis or highly trained specialists.

Show Detail

General Purpose EMI Filter

General Purpose EMI Filter produced by Scahffner company are designed for easy and fast chassis mounting. FN 2010 filters are also available as B versions without Y-capacitors for medical applications as well as A version with low capacitance for safety critical applications with necessity for low leakage.

Show Detail

Three Phase Passive Filter

Schaffner ECOsine harmonic filters represent an economical solution to the challenge of load-applied harmonics mitigation in three-phase power systems. With a plug-and-play approach and more compact dimensions than comparable products, they can be quickly installed and easily commissioned. They increase the reliability and service life of electric installations, help utilize electric sytem capacity better, and are the key to meet Power Quality standards such as IEEE 519.

Show Detail

Multi-stage General Purpose EMI Filter

Multi-stage General Purpose EMI Filter produced by Scahffner company are designed for easy and fast chassis mounting. FN 2010 filters are also available as B versions without Y-capacitors for medical applications as well as A version with low capacitance for safety critical applications with necessity for low leakage.

Show Detail

Multi stage EMI Filter

Multi stage EMI Filter FN 352Z series is developed to meet high filter attenuation requirements by using multi-stage filter design. Multi stage EMI Filter is component of single phase filters produced by Schaffner company. Additional high surge pulse voltage protection up to 2 kA is integrated to protect sensitive equipment Choosing FN 352Z product line brings you the rapid availability of a standard filter associated with the necessary safety acceptances.

Show Detail

Common mode Suppression chokes

common mode suppression chokes are mainly used for filter noise on AC power lines. noise on commercial power lines could enter the requirement and disturb the proper function. noise generated by the equipment for example from switch mode power supplies need to be filtered and spread of such generated noise need to be suppressed. common mode suppression chokes together with line bypass capacitors building an AC EMI suppression filter device.

Show Detail

AC Feedthrough Filter

Feedthrough filters offer a high insertion loss across a broad band of frequencies from a few tens of kHz up to the GHz region. In general, feedthrough filters offer a higher level of EMI suppression than feedthrough capacitors of the same current rating. This is particularly relevant to applications where source impedance is smaller than 50Ω. Different versions are available offering a wide selection on operating currents and performance levels. AC feedthrough filters are designed and approved for up to 300 VAC 50/60 Hz operation.

Show Detail