Relays

Visits : 1754
Relays

A relay is an electrically operated switch . Many relays use an electromagnet to mechanically operate a switch , but other operating principles are also used, such as solid-state relays . Relays are used where it is necessary to control a circuit by a low-power signal (with complete electrical isolation between control and controlled circuits) , or where several circuits must be controlled by one signal . Bornika is the exclusive representative of Relpol ، Contrel , Ziegler ,and sale representative of A.Eberle Sprecher companies, in purchasing , sales , consulting and distribution of industrial equipment such as relays .

Products

Sprecher compact line protection SPRECON-E-P DS..6-0

With SPRECON-E-P DS6-0 Sprecher Automation offers a compact line of overcurrent-time protection devices . The compact SPRECON-E-P DS6-0 protection devices are equipped with standardised hardware modules . The standard basic functionalities can be extended by packages which include additional protection functions .

Show Detail

Finder industrial relay series 55.32

Finder industrial relay series 55.32 with ordering code 55.32.9.012.0054 contain AgNi Contact , for plug-in sockets, with coil voltage 12V DC. this relay contain lockable test button+LED(AC)+mechanicalindicator

Show Detail

Two Contacts Relay with coil 12V DC

Two contacts relay with ordering code R2N-2012-23-1012-WTL contain AgNi Contact , in cover, IP 40 version, for plug-in sockets, with coil voltage 12V DC. Relays of general application . For plug-in sockets : 35mm rail mount ,for plug-in sockets on panel mounting , PCB mounting . with miniature dimensions , 2-CO and DC coils . rated load AC1 - 12 A/250 V AC; mechanical indicator, LED (option); test button

Show Detail

Single Phase Power Controller

Power controller RP7 type allows to control the delivered power from an a.c. voltage source to a resistance or resistance-inductive receiver of electrical energy and the rotational speed of 1-phase induction motors with a capacitor or commutator motors at small loads.

Show Detail

LUMEL Power Controller

The RP1 power controller is destined for automatic temperature control systems in electrothermal devices.

Show Detail

Two Contacts Relay with coil 24V DC

Two contacts relay with ordering code R2N-2012-23-1024-WTL contain AgNi Contact , in cover, IP 40 version, for plug-in sockets, with coil voltage 24V DC. Relays of general application . For plug-in sockets : 35mm rail mount ,for plug-in sockets on panel mounting , PCB mounting . with miniature dimensions , 2-CO and DC coils . rated load AC1 - 12 A/250 V AC; mechanical indicator, LED (option); test button

Show Detail

Finder industrial relay series 55

Finder industrial relay series 55 with ordering code 55.32.9.024.0054 contain AgNi Contact , for plug-in sockets, with coil voltage 24V DC. this relay contain lockable test button+LED(AC)+mechanicalindicator

Show Detail

Sprecher line protection SPRECON-E-P DS..6-2

The overcurrent-time protection acts as the main protection function . The devices include standardised hardware modules and firmware . They all provide protection functions of the same range . Beside typical protection functions and measured-value collection , protection devices also feature control of circuit-breakers .

Show Detail

Finder industrial relay 2 contacts

Finder industrial relay 2 contacts with ordering code 55.32.8.024.0054 contain AgNi Contact , for plug-in sockets, with coil voltage 24V AC. this relay contain lockable test button+LED(AC)+mechanicalindicator

Show Detail

Two Contacts Relay with coil 24V AC

Two contacts relay with ordering code R2N-2012-23-5024-WTL contain AgNi Contact , in cover, IP 40 version, for plug-in sockets, with coil voltage 24V AC. Relays of general application . For plug-in sockets : 35mm rail mount ,for plug-in sockets on panel mounting , PCB mounting . with miniature dimensions , 2-CO and AC coils . rated load AC1 - 12 A/250 V AC; mechanical indicator, LED (option); test button

Show Detail

Power Controller

The area of RPL1 application includes: - electric furnaces and drying structures, especially industrial furnaces and tunnel cap, furnaces for annealing and brazing, and founder crucible furnaces, drying ovens, furnaces with quenching in salt baths; - mechanical engineering equipment, aggregates and extruders for plastics processing, winding machines and tempering springs, spot welding and linear; - production of glass and glazing, plant and equipment for drying in the infrared and ultraviolet, vats for melting glass and heating trays for forming glass furnaces; - chemical and petroleum industry; radiators lining piping, wiring warming

Show Detail

Three phase Power Controller

The RP3 power controller is a contactless three-phase power energy electronic device which includes a thyristor connector and an electronic gate triggering system. (GTS)

Show Detail