surge arrester and lightening counters are used to count the number of passing surge through the system and report the date and time of surge occurance. Bornika is the exclusive agent of OBO Bettermann , Iskra , Novaris in the fields of consultation , sales and distribution of power industry products including Surge Arrestor's Counters.
ProLEC Basic is the first in line of the new lightning current sensors family. ProLEC device is installed directly on lightning down conductor. It is made to withstand currents up to 100kA (10/350). By installing ProLEC on a building's lightning protection system , we gain the knowledge of frequency and time/date of atmospheric discharges that affected the object. Preventive or maintenance measures can be taken accordingly, depending on information gained from the counter.Show Detail
The Thunderbolt counter displays the total lightning strikes that hit a lightning rod installation. The lightning strike counter Compt@ir is composed of a 6 digit display. Each lightning strike is recorded when passing by incrementing by one. The regular observation of the display is required for proper monitoring of the installation. The lightning strike counter is essential for the proper maintenance of the Installation Outdoor Protection against Lightning. The NFC standard reference 17-102 imposes "an audit will be performed after each lightning strike". Compt@ir records the positive and negative lightning. It positions and works on all types of conductors (flat, round, braided ...) and for all dimensions thanks to its universal fixings. The lightning counters Compt@ir comply with applicable standards (NFC 17-102, 50164-6 EN). This regular monitoring requires no moving with the option Contact@ir+Rout@ir. This communication system warns in real time during a thunderbolt.Show Detail
CDR-401 is the new generation of Cirprotec lightning discharge counter, according to UNE-EN 50164-6 / UNE-EN 62561-6 / UTE C 17106. CDR-401 is a "Clip-on" counter that can be installed around the conductor. Ideal also for retrofitting. CDR-401 can be firmly attached to the conductor by means of internal rubber pads. Hence, the system can be firmly installed without even attaching it to the wall with screws.Show Detail