Megacon Insulation Monitoring series KCM163x


    • Model
    • KCM163

    • Order code
    • KCM163x

    • Country
    • Norway
  • The digitally controlled KCM163x series monitors insulation level between a non-grounded (IT) AC mains and its protective earth, regardless of whether the mains is live or non-live (standby). The unit is for land, marine, offshore, sub-sea and ocean floor use. An AC or DC auxiliary voltage is required for the unit, if powered from a separate source the network can also be monitored during standby conditions. Only ONE KCM163x can be connected to each IT-system. Features: -Direct connection up to 690V line voltage, up to 6.6kV with HV adapter -Monitoring during both live and standby conditions -For use in land, marine, offshore, sub-sea and ocean floor Installations -Triple-zone insulation monitoring -"Megger" - safe to 1,4kVDC when aux power is OFF -Immune to earth capacitance and voltage surges -Analogue output proportional to meter reading (F-version) -Optional slave indicator Borna niroo karan company (Brnika) is Exclusive Representative of Megacon , in the purchase, sales, consulting and distribution and industrial equipment and measurement equipment, including Insulation Monitoring and so is active .

  • Visits: 102
    • Power Supply
    • 100-120, 200-240, 380-415 or 440-460VAC, 40-70Hz (Fuse 0.5A) 12-24, 48 or 110VDC (Fuse 2A)

    • Contact rating
    • AC: 100VA - 250V/2A max. DC: 50W - 100V/1A max.

    • Output
    • Analogue Output:(F-versions) Up to 20mA, max 500R Up to 10V, min 100kohm

    • Operating Temperature
    • -20 to +70ºC

    • Approximate Weight
    • 0.6kg

    • IP
    • IP21

More details
  • scale description :
  • The ohmmeter and the triple-zone status LEDs give at a glance the clear safetymessage: -ALARM(red zone) -WARNING(yellow zone) -HEALTHY(green zone )
  • High Voltage Adaptors up to 6,6kVAC for KCM163x series:
  • VoltageAdaptors CH163x series andAN6,6 are used for Insulation Guard KCM163x when the monitored line voltage is higher than 690VAC. CH163/1,4 up to 1.4kVAC CH163/3,6 up to 3.6kVAC CH163/5 up to 5kVAC AN6,6 up to 6,6kVAC
  • Caution:
  • Terminal 1must be disconnected during ’’megger’’test.
  • Refinery

  • Electronics industry

  • Power industry

  • Marine and shipbuilding industry

  • Road Construction industry

  • Military and defense industry

  • Oil and gas industry

  • Power Plant industry

  • Panel building companies

  • Steel industry

  • Instrumentation Companies

  • Engineering services industry

  • Railway and subway industry

  • Meteorological industry

  • Cathodic protection companies