Full Performance Passive Filter

FN 3413-x-y

    • Model
    • FN 3413

    • Order code
    • FN 3413-x-y

    • Country
    • Germany
  • Schaffner ECOsine harmonic filters represent an economical solution to the challenge of load-applied harmonics mitigation in three-phase power systems. With a plug-and-play approach and more compact dimensions than comparable products, they can be quickly installed and easily commissioned. They increase the reliability and service life of electric installations, help utilize electric sytem capacity better, and are the key to meet Power Quality standards such as IEEE 519.ECOsine filters calm your harmonic waves. Schaffner ECOsine filters can be applied to virtually any kind of power electronics with front-end six-pulse rectifiers, where harmonic current distortion needs to be reduced to defined limits. Typical applications, where the above-mentioned non-sinusoidal consumers of power can account for a significant portion of the load. include: - Equipment with front-end six-pulse rectifier - AC and DC motor drives - Factory automation equipment - Water/wastewater treatment facilities - Fan and pump applications - HVAC installations - DC fast chargers ECOsine Passive Harmonic Filter Model FN 3412 has properties as follows: - The industry standard for 6-pulse rectifiers and motor drives - The most compact 5% THID filter available - Excellent behavior under partial load conditions - Filters for thyristor (SCR) rectifiers Borna Niroo Karan (Bornika) is the exclusive agent of Schaffner in the fields of consultation , sales and distribution of power industry products including ECOsine Harmonic Passive Filter.

  • Visits: 25
Downloads
Specifications
    • Voltage Range
    • 3x 380 to 480 VAC ±10%

    • Frequency
    • 60 Hz ±1 Hz

    • Power
    • 5 to 250 hp

    • Total Harmonic Current Distortion (THID)
    • <5 % @ rated power

    • IP
    • IP20 / NEMA1

    • Overload capability
    • 1.6x rated current for 1 minute, once per hour

More details
  • protection standard:
  • NEMA1 standards are for enclosure of electrical equipment include codes 1 , 2 , 3 , 3R , 3S , 4X and 5. specifications of each code given by a file in above download links. Type 1 : Enclosures constructed for indoor use to provide a degree of protection to personnel against access to hazardous parts and to provide a degree of protection of the equipment inside the enclosure against ingress of solid foreign objects (falling dirt).
  • Ordering Codes:
  • in above ordering code FN 3412-x-y : x include this numbers : 8 ، 11 ، 15، 21 ، 28 ، 35، 41 ، 53، 65 ، 80، 105، 130 ، 160 ، 190 ، 240 and 310. y : input / output connections
Prices