Visit Times: 190
Why line reactors are proposed
Here are some of the proposed expert engineers said. The reactor can be easily added to an existing VFD.VFD to shocks (surge) protection. Reliability and longevity increases VFD. Tryphay protect against overvoltage. A cost-effective solution to reduce the harmonic distortion. Somewhat against voltage spikes buffering (buffering) created. Facilities to meet corporate standards puts the power in the hands of the consumer. Of litigation and prevent damage to property. The high frequency noise injected into the system to reduce the power. True power factor improves. Audio interference (cross-talk) between the drive to reduce. Burning fuses or circuit breakers to cause burning or cutting off the circuit to prevent current spikes. Required impedance between VFD and capacitors to provide power system. Capacitors and other components of the power system harmonic resonance protection. By reducing the flow of empty capacity increases system. Errors (faults) period and reduces the problems of unknown origin. Chartered engineers drive manufacturers suggest that all drives of reactors. Reactors at least for pollution control and power system harmonics are required. Line reactors due to the performance, reliability and low price are mostly harmonic correction methods are preferred. Line reactors, AC, or a combination of AC and DC reactor Surge Protection (rate) increases and the addition of harmonics are reduced. AC line reactors has an impedance of 3% and 5% are typical. 5% better controlled models harmonics and surge resistance increases. But the price of 3% compared with slightly more.